Abstract:Significant efforts have been made to improve concrete mix design for shrinkage reduction and crack control, including reduction of cement content and selection of cement type with less heat of hydration, maximizing aggregate contents, and introduction of discrete fibers in concrete to increase internal restraint. Although high-performance concrete (HPC) mixes including fibers [e.g., steel fibers, polypropylene fibers, or polyvinyl alcohol (PVA) fibers] have reduced the level of shrinkage cracking, they have not eliminated it. Thus, understanding the level of tensile strain the fibers take in the concrete could provide valuable information to aid engineers to make an informed decision on the need for fibers in tension demand in the concrete and determine the appropriate fiber detailing and concrete mix additives. As such, this study aimed to explore a multiscale, hierarchical fiber gradation through a combination of nanoscale nanofabrillated cellulose (NFC) with microscale sisal fibers and macroscale steel fibers in concrete to mitigate the causes of concrete shrinkage cracking at an early age. A total of 22 mixtures were designed and tested. The results show that nanofabrillated cellulose, sisal fiber, and steel fiber can play an excellent synergistic effect to inhibit the early-age shrinkage of concrete. The test data reveal that, when steel fiber is partially replaced by sisal fiber, the early shrinkage of steel fiber concrete is significantly reduced by 26.91% at maximum. Meanwhile, when the NFC content reached 0.15%, the 7-day shrinkage value of concrete reinforced by steel fiber, sisal fiber, and NFC was the lowest, and the shrinkage strain value decreased by 25.03% compared with N0. Compared with the experimental group in which sisal fiber partially replaced steel fiber, the 7-day shrinkage value of the experimental group in which sisal fiber mixed with NFC, sisal fiber mixed with NFC and steel fiber decreased to a certain extent, among which SF1.1FF0.4NFC0.15 showed the best shrinkage inhibition performance, and the shrinkage strain value decreased by 82.56% and 45.39% compared with N0 and SF1.1FF0.4, respectively.

Effects of Steel Fiber on Drying Shrinkage of Ultra High Performance Concrete

Powder Gradation Effect on the Fresh, Mechanical, and Early-Age Shrinkage Properties of UHPC

Investigation of early drying shrinkage of ultrahigh-performance concrete under windy conditions

Effects of Type and Content of Fibers, Water-to-Cement Ratio, and Cementitious Materials on the Shrinkage and Creep of Ultra-High Performance Concrete

Effect of different steel fiber types on mechanical properties of ultra-high performance concrete

Autogenous shrinkage prediction models and microstructure of UHPC with single or binary addition of an expansive agent and steel fibers

Establishment of Drying Shrinkage Deformation Model and Ingredient Correlation Analysis of Ultra-high Performance Concrete

Mechanical and Drying Shrinkage Performance Study of Ultra-High-Performance Concrete Prepared from Titanium Slag under Different Curing Conditions

The Effects of Corrugated Steel Fiber on the Properties of Ultra-High Performance Concrete of Different Strength Levels

Effect of Steel Fibers on Tensile Properties of Ultra-High-Performance Concrete: A Review

Effect of different shapes of steel fibers and palygorskite-nanofibers on performance of ultra-high-performance concrete

Experiments on drying shrinkage and creep of high performance hybrid-fiber-reinforced concrete

Effects of Steel Fiber and Specimen Geometric Dimensions on the Mechanical Properties of Ultra-High-Performance Concrete

Effects of Shrinkage Reducing Agent and Expansive Admixture on the Volume Deformation of Ultrahigh Performance Concrete

Effects of Steel Slag Powder and Expansive Agent on the Properties of Ultra-High Performance Concrete (UHPC): Based on a Case Study

High- and ultra-high-performance concrete produced with sulfate-resisting cement and steel microfiber: Autogenous shrinkage, fresh-state, mechanical properties and microstructure characterization

Plastic and early-age shrinkage of ultra-high performance concrete (UHPC): Experimental study of the effect of water to binder ratios, silica fume dosages under controlled curing conditions

Mechanical and shrinkage performance of steel fiber reinforced high strength self-compacting lightweight concrete

Mechanical Properties and Early-Age Shrinkage of Ultra-High Performance Concrete Mortar with Recycled Fine Aggregate

Drying Shrinkage Behavior of Ultra High Toughness Cementitious Composites and Its Influence on Anti-Cracking Capacity

Multiscale Hierarchical Fiber Gradations in Concrete to Reduce Early-Age Shrinkage Cracking Potential