Abstract:A new dual-imaging-unit atomic force microscope (DIU-AFM) was developed for wide-range length metrology. In the DIU-AFM, two AFM units were combined, one as a reference unit, and the other a test one. Their probes with Z piezo elements and tips were horizontally set in parallel at the same height to reduce errors due to geometric asymmetry. An XY scanner was attached to an XY block that was able to move in the X direction with a step of about 500 nm. A standard porous alumina film was employed as the reference sample. Both reference sample and test sample were installed at the center of the AT scanner on the same surface and were simultaneously imaged. The two images had the same lateral size, and thus the length of the test sample image could be accurately measured by counting the number of periodic features of the reference one. The XY block together with the XY scanner were next moved in the X direction for about 1.5 mum and a second pair of reference and test images were obtained by activating the scanner. In this way, a series of pairs of images were acquired and could be spliced into two wide-range reference and test images, respectively. Again, the two spliced images were of the same size and the length of test image was measured based on the reference one. This article presents a discussion about the structure and control of the DIU-AFM system. Some experiments were carried out on the system to demonstrate the method of length calculation and measurement. Experiments show a satisfactory result of wide-range length metrology based on the hexagonal features of the porous alumina with a periodic length of several tens of nanometers. Using this method the DIU-AFM is capable of realizing nanometer-order accuracy length metrology when covering a wide range from micron to several hundreds of microns, or even up to millimeter order. (C) 2004 Wiley-Liss, Inc.

A Novel Apparatus to Measure the Step Height of the Mask by Means of Non-contact Method

Step-height Measurement by Means of a Dual-Frequency Interferometric Confocal Microscope.

Method of Heterodyne Confocal Microscopy Measuring Big Step Height

Nano-Displacement Measurement Based On Virtual Pinhole Confocal Method

Step Height Measurement By Means Of Common-Path Heterodyne Interferometric Confocal Microscope

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Axial nano-displacement measurement with high resolution and wide range based on asymmetrical illumination.

Diffraction Phase Microscopy Realized with an Automatic Digital Pinhole

New Advance In Confocal Microscopy

System to Measure Step Hight by Combining Dual-frequency Interferometry and Confocal Microscopy

Differential internal multi-reflection method for nano-displacement measurement

A System for Measurement of Line Width by Combining Polarization Interferometry with Confocal Microscopy

Development of Step Height Measurement

Dual imaging-unit atomic force microscope for nanometer order length metrology based on reference scales

Wide-range length metrology by dual-imaging-unit atomic force microscope based on porous alumina.

A Novel Wafer Defocus Measurement Method for Spot-Scanning Imaging System Using Laser Triangulation

Adjustable Plane Mirror Interferometer Adapted for Microelectronic Mask with Different Thickness

Evaluation of Step Height Standard Using Nano-Measuring Machine Integrated with Focusing Sensor

Laser confocal feedback tomography and nano-step height measurement

Dynamic Confocal Optical Probe Based on Time Difference Measurement

A dual-probe three-dimensional profile measurement system