Abstract:A prototype STM system with high aspect ratio measurement capability is developed to fulfill accurate profile measurement of a high step microstructure with 90 degrees steep sidewall. Distinguished from the traditional STM, the new system consists of a long range piezoelectric (PZT) actuator with full stroke of 60 mu m as Z-direction servo scanner, a specially customized high aspect ratio STM probe with effective tip length of 300 mu m, and an X-Y motorized driven stage for planar scanning. A tilt stage is used to adjust the probe-sample relative angle to compensate the evitable non-parallel effects. Based on the new STM system, sample-tilt-scanning methodology is proposed for eliminating the scanning blind region between the probe and the microstructure. A high step microstructure with height of 23 mu m, 90 degrees steep sidewall and width of 50 mu m has been successfully measured. The slope angle of the sidewall has been achieved to be 85 degrees and the step height at the rising edge and the trench depth at the falling edge are both measured to be 22.96 mu m. The whole measuring process only spent less than 10 min. It provides an effective and nondestructive solution for the measurement of high step or deep trench microstructures. In addition, this work also opens the way for further study on sidewall roughness and the tip-sample interaction at the edge of the sidewall, which are highly valuable for fabrication and quality control of high step microstructures. (C) 2012 American Institute of Physics. [doi:10.1063/1.3676651]

Step Height Measurement By Means Of Common-Path Heterodyne Interferometric Confocal Microscope

Method of Heterodyne Confocal Microscopy Measuring Big Step Height

Step-height Measurement by Means of a Dual-Frequency Interferometric Confocal Microscope.

High-Sensitivity Quantitative Phase Microcopy

High-sensitivity Quantitative Phase Microcopy (conference Presentation)

Small Angular Displacement Measurement Based on an Autocollimator and a Common-Path Compensation Principle.

Nano-Displacement Measurement Based On Virtual Pinhole Confocal Method

A Novel Apparatus to Measure the Step Height of the Mask by Means of Non-contact Method

New Advance In Confocal Microscopy

System to Measure Step Hight by Combining Dual-frequency Interferometry and Confocal Microscopy

Rapid Measurement Of A High Step Microstructure With 90 Degrees Steep Sidewall

A System for Measurement of Line Width by Combining Polarization Interferometry with Confocal Microscopy

Step Height Measurement by the Metrological Atomic Force Microscope

Measurement of Nano-step Height Scales with a Metrological AFM Head

Chromatic confocal coherence scanning interferometry with speed-variable scanning method to measure large-depth step

Evaluation of Step Height Standard Using Nano-Measuring Machine Integrated with Focusing Sensor

Development of Step Height Measurement

Measurement and Characterization of a Nano-Scale Multiple-Step Height Sample Using a Stylus Profiler

Comb-referenced Frequency-Sweeping Interferometry for Precisely Measuring Large Stepped Structures

Time-of-flight Detection of Femtosecond Laser Pulses for Precise Measurement of Large Microelectronic Step Height

Laser confocal feedback tomography and nano-step height measurement