Fabrication of silica-MFI zeolite membranes for separation of CO2/N2 gas mixture

Baoquan ZHANG,Liang SUN,Mengyao ZHENG,Jun YANG,Xiufeng LIU

DOI: https://doi.org/10.16159/j.cnki.issn1007-8924.2017.02.005

2017-01-01

Abstract:The porous α-Al2O3 substrates were treated or modified to change the surface properties.The silica-MFI zeolite membranes were synthesized on treated or modified α-Al2O3 substrates by in-situ crystallization.The experimental results by SEM,XRD and contact angle revealed that the untreated porous α-Al2O3 substrate,and that treated by using H2O2 or with a zirconia intermediate layer were hydrophilic,on which the continuous zeolite membrane could not be formed.While the porous α-Al2 O3 substrate modified by using (3-chloropropyl)trimethoxysilane (3-CP-TMS) and dodecyltrimethoxysilane (DMS) or covered with a chitosan layer was hydrophobic,on which the continuous and dense zeolite membrane could be formed.The synthesized zeolite membrane on the porous α-Al2O3 substrate modified with DMS or covered with a chitosan layer were preferentially oriented.The hydrophobic nature of the substrate surface should be the prerequisite for synthesizing continuous zeolite membranes,at the same time,a proper H2O/Si ratio would be a critical factor for the formation of a dense silica-MFI membrane.After being applied in separation of CO2/N2 gas mixture,the MFI membrane synthesized on DMS-modified α-Al2O3 substrate had an increased selectivity for CO2.