Abstract:Introduction Reducing CO2 emissions for addressing climate change concerns is becoming increasingly important as the CO2 concentration in the atmosphere has increased rapidly since the industrial revolution. Most of currently investigated mitigation processes require CO2 in a concentrated form. However, CO2 is emitted from large sources, such as coal-fired power plants, at ~15% concentration. Therefore, capturing CO2 from dilute streams is an important step for many mitigation methods. Membrane separation methods are particularly promising due to potentially high CO2 selectivities and fluxes. By a proper choice of the pore size and surface properties, the CO2 transport across a membrane can be facilitated with respect to those of N2 and O2 leading to an efficient CO2 separation process. However, current membranes suffer from a poor control over the pore size on the 2-4 nm scale and surface properties required for CO2 separation. 2 We describe here novel mesoporous silica membranes containing surface-attached amino groups promising for CO2 separation from dilute sources. Defect-free mesoporous silica membranes on porous alumina supports exhibiting 26~28A pores were obtained by spin-coating (~5-7 μm thick) and solution growth methods. Several kind of amino groups were attached to the membrane surface using amino-containing silicon alkoxides, such as 3-aminopropyltriethoxysilane. Smaller pores (~18-22A) were obtained by silylating the original calcined membranes with silane coupling agents. The characterization of the silylated silica membranes by BET surface area measurements, N2 adsorption pore size analysis and TGA confirmed that silylation technique was successful in decreasing the membrane pore size by ~8 A which is required for completely filling the pore volume with surface attached aminopropylsilyl groups and achieving facilitated transport of CO2. CO2/N2 separation on amine-modified silica membranes was investigated at 20-70C and transmembrane pressure drop of 0.2-1 atm as a function of the pore size and the nature of the amino group using a Wicke-Kalenbach permeability cell. The membrane performance was evaluated with respect to permeance and separation selectivity, determined by a GC/MS analysis of the feed, permeate, and retentate streams.

Ordered Mesoporous Silica Membranes for CO2 Separation from Flue Gas

Selective CO2 Separation from CO2−N2 Mixtures by Immobilized Carbonate−Glycerol Membranes

Preparation and Co2 Sorption/Desorption of N-(3-Aminopropyl) Aminoethyl Tributylphosphonium Amino Acid Salt Ionic Liquids Supported into Porous Silica Particles

Fabrication and Performance Evaluation of Industrial Alumina Based Graded Ceramic Substrate for CO2 Selective Amino Silicate Membrane

Mixed-Matrix Organo–Silica–Hydrotalcite Membrane for CO2 Separation Part 2: Permeation and Selectivity Study

Ultrahigh permeation of CO2 capture using composite organosilica membranes

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Comparison of CO2 Separation Efficiency from Flue Gases Based on Commonly Used Methods and Materials

A High-Permeance Supported Carbon Molecular Sieve Membrane Fabricated by Plasma-Enhanced Chemical Vapor Deposition Followed by Carbonization for Co2 Capture

Scalable Polymeric Few-Nanometer Organosilica Membranes for Pre-Combustion CO 2 Capture

Highly CO 2 -Selective Membranes Composed of Quaternary Ammonium Functionalized Silica Nanoparticles

Aminated ZIF‐8 to facilitate CO2 sieving through polyvinyl alcohol/ionic liquid membranes

Microporous Adsorbent-Based Mixed Matrix Membranes for CO2/N2 Separation

Benchmark CO2 separation achieved by highly fluorinated nanoporous molecular sieve membranes from nonporous precursor via in situ cross-linking

A lithium–aluminosilicate zeolite membrane for separation of CO2 from simulated blast furnace gas

Thin Film Mixed Matrix Hollow Fiber Membrane Fabricated by Incorporation of Amine Functionalized Metal-Organic Framework for CO2/N2 Separation

Utilizing silica fume and synthetically produced mesoporous silicas for simulated flue gas CO2 adsorption

Surpassing Robeson Upper Limit for CO2/N2 Separation with Fluorinated Carbon Molecular Sieve Membranes

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

Sulfonated Chitosan Gel Membrane with Confined Amine Carriers for Stable and Efficient Carbon Dioxide Capture

Novel aminated F-Ce nanosheet mixed matrix membranes with controllable channels for CO 2 capture