Abstract:The microstructures, mechanical properties and tribological behaviors of the NiAl-based composite coatings with various addition of Nb were investigated. Particularly, the coatings registered a typically fine lamellar morphology and a dense microstructure, of which the microhardness increased with the Nb content increasing. Moreover, the coatings with various Nb contents registered different tribological properties and wear mechanisms at different test temperatures. The wear mechanisms of the coatings transferred from serious abrasive wear (NA1), brittle fracture accompanied with abrasive wear (NA2), abrasive wear (NA3) to serious fracture and abrasive wear (NA4) with the increment of Nb content at room temperature. At 400 degrees C, the coatings with low contents of Nb (NA1, NA2) possessed low friction coefficients but high wear rates due to the plastic deformation and micro-cutting. However, the coatings with high contents of Nb (NA3, NA4) possessed higher friction coefficients but low wear rates due to the reinforcement and anti-wear effect of metal Nb, and the wear mechanism was dominated by adhesive wear. At 800 degrees C, the coatings possessed the wear mechanism of slight abrasive wear, and a series of bimetallic oxides, e.g. AgNbO3 and NiNb2O6 generated through the high-temperature tribochemical reactions. The synergistic lubrication of oxides was responsible for the lower COFs of the coatings at 800 degrees C. But higher wear rate of the NA1 coating was ascribed to the low hardness and adhesive strength due to the low content of metal Nb. As a whole, metal Nb could observably enhance the wear resistance of the coatings at different temperatures.

Performance of Protective Compound Coating for НЦy Niobium Alloy Evaluated by Thermo-Cyclic Creep Test Method

Effect of NiCr and NiCrAl Coatings on the Creep Resistance of a Ni Alloy

Room temperature nanoindentation creep behavior of CoNiCrMo-based high entropy amorphous alloy coatings prepared by HVAF

Creep Behavior of Plasma Sprayed Nicr and Nicral Coating-Based Systems

Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy

Long term thermal stability of Ni2Al3/Ni hybrid protective coatings formed on creep resistant ferritic steels

Microstructures, Mechanical Properties and Tribological Behaviors of NiAl-based Composite Coatings with Various Addition of Nb

Coating-assisted deterioration mechanism of creep resistance at a nickel-based single-crystal superalloy

Interface stability of NiCrAlY coating without and with a Cr or Mo diffusion barrier on Ti-42Al-5Mn alloy

Growth, mechanical properties, and tribological performance of TiAlN/NbN and NbN/TiAlN bilayer coatings

Microstructure and properties of niobium carbide composite coatings prepared by plasma spraying

High-Temperature Wear Behavior and Mechanisms of Self-Healing NiCrAlY-Cr3C2-Ti2SnC Coating Prepared by Atmospheric Plasma Spraying

Niobium alloy electron beam surface cladding silicide coating crack control

The High Temperature Thermal Shock Performance of Si-Ti-Cr Silicide System Coating on Nb-Hf Alloy Surface in Atmosphere and Vacuum

A Magnetron Sputtered Microcrystalline Β-Nial Coating for SC Superalloys. Part II. Effects of a NiCrO Diffusion Barrier on Oxidation Behavior at 1100 °C

Effect of Spray Method and Sprayed Material on Creep Behavior of MCrAlY Coating

Microstructural Evolution and Wear Behaviors of NbC-reinforced Ti-based Composite Coating

High-temperature Tribological Properties of a Novel AlFeCoNiCr-Cr3C2 Cermet Coatings

Evolution and Structure Characterization of the Carbide and Boride during Creep in A Ni-based Superalloy

Effect of in Situ NbC on Microstructure and Wear Properties of Laser Cladding Co-Based Coatings

Preparation, Mechanical Properties and Cyclic Oxidation Behavior of the Nanostructured NiCrCoAlY-TiB2 Coating