Abstract:With ride comfort in a motorcycle gaining significance, it is important to minimize vibration levels at the customer touch points. The reciprocating piston imparts rotary motion to the crankshaft which in turn induces unbalance forces and produces vibration in the vehicle, thus influencing the ride quality. Generally, the primary inertial forces are balanced by a combination of balancer body and crank web. However, being a commuter bike, a balancer body could not be accommodated due to cost and space constraints. In such scenario, the first order unbalance force cannot be completely eliminated but can only be redistributed by adding counterweight to the crankshaft. Proper distribution of these forces is required for optimum vibration levels at motorcycle touch sensitive points (TSP) such as handle bar, footrest etc. In the current study, crankshaft of a single cylinder motorcycle engine is optimized for balancing to reduce vibration at the TSP through multi body dynamics (MBD) and finite element (FE) simulation tools. The complete crank train comprising of piston assembly, connecting rod, bearing, crankpin and crankshafts are modelled with accurate mass and inertia in a commercially available MBD software. Crankshaft balancing factor and the angle of unbalance force are varied by changing different design parameters of the crankshaft such as web radius and width, modification in shape etc. Inertia forces at engine mounting locations due to the first order unbalance of crankshaft are predicted using MBD simulation. These forces are then given as input to full vehicle FE model to predict the vibration response at TSP for the operating speed range of vehicle. Crankshaft design is finalized based on optimal vibration response at TSP.

The Crank Balance and Vibration Measurement on a Three-Cylinder Car Engine

Study of Automatic Dynamic Balancing System for Engine Crankshaft

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod

Influence of mass unbalancing of three-cylinder engine on idle vibration based on powertrain model

Measurement and Analysis of One 1.8 L Gasoline Engine Vibration

Experimental Study on Torsional-bending-longitudinal Vibrations of High Speed Diesel Engine Crankshaft

A Study on Axial Vibration of Automotive Engine Crankshaft

Dynamic Analysis of the Crank and Connecting Rod of Single-Cylinder Gasoline Engine Before and After Adjustment

An Analytical Method of Crankshaft Vibration on the Continuous Mass System for Internal Combustion Engine

Balancing Optimization of a Motorcycle Engine Crankshaft for Vibration Reduction

The Inner Equilibrium Analysis and Counterweight Design of Engine

Torsional Vibration Analysis Based on Multi-body Dynamics of Flexible Crankshaft System

Calculation and Comparative Analysis on Single Shaft Balancing Scheme for Four-cylinder Engine

Simplified model for vibration analysis of diesel engine crankshaft system

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

Axial Vibration of High-Speed Automotive Engine Crankshaft

Study on the Amplitude of Motorcycle Engine Unbalance Force

Lubrication characteristics study of main bearings on crankshaft balance rate

Balancing of Lightweight Crankshaft and its performance under Virtual Engine Operation

Optimization Study of Engine Balance Shaft