Abstract:To improve the applicable performance of the engine and accomplish the determination of optimization, the crankshaft, as one of its essential components, is optimized based on experimental design and response surface method (RSM). First, the static analysis of the crankshaft is carried out. Over the solution, the maximum equivalent stress and deformation distribution of the crankshaft and the area with the most concentrated stress are obtained to provide the direction for subsequent optimization. Then the modal analysis is carried out to define the portions with large amplitude to prevent resonance. At the same time, based on the modal analysis results, the harmonic response of the crankshaft is examined to ensure that the crankshaft can avoid resonance and fatigue caused by forced vibration at different engine speeds. It also provides a theoretical basis for the further optimization design of the crankshaft. Then, through the experimental design and response surface optimization analysis, the optimization purpose of reducing the maximum equivalent stress, maximum deformation, and lightweight of the crankshaft is accomplished. Through the design expert software, the response surface model and fitting equation of the crankshaft are solved by the RSM, which provides a reference basis for optimizing the crankshaft. Finally, according to the optimization scheme, the crankshaft is reconstructed, and the optimized crankshaft model is compared with the original model. After optimization, the maximum equivalent stress is reduced by 9.43%, the maximum deformation is reduced by 3.68%, and the mass is reduced by 1.30%. At the same time, the first three natural frequencies are reduced by 10.28, 10.28, and 10.34%, which achieves the purpose of optimizing the crankshaft design. The research results provide effective theory and evidence for the structural design of the crankshaft.

Dynamic Analysis of the Crank and Connecting Rod of Single-Cylinder Gasoline Engine Before and After Adjustment

Lubricating Simulation Analysis of Connecting Rod Bearing Based on AVL-EXCITE

Study of Automatic Dynamic Balancing System for Engine Crankshaft

Multi-body dynamics and finite element method co-simulation for crankshaft dynamical strength analysis

Determination on the Operation Condition of Crankshaft of Diesel Engine and Its Static Strength Analysis

AN EFFICIENT CRANKSHAFT DYNAMIC ANALYSIS USING SUBSTRUCTURING WITH RITZ VECTORS

A New Mechanical Analysis of a Crankshaft-connecting Rod Dynamics Using Lagrange’s Trigonometric Identities

Analysis on Crankshaft System's Dynamical Behavior Based on Simulation and Experimental Methods

Force and Motion Analysis of Crankshaft and Mainshaft of a Diesel Engine

Finite element analysis of a vehicle diesel engine crankshaft

Simulation-based dynamic optimal design of crankshaft counterweights

Engine Crankshaft Counterweight Design Optimization

An Experimental Study on Engine Dynamics Model Based In-Cylinder Pressure Estimation

Dynamic Analysis of 4D20 Passenger Car Diesel Engine Crankshaft System

Dynamic simulation research on diesel engine's cranktrain and block

Finite element analysis for the crankshaft of the piston compressor

Finite Element Analysis of New Crankshaft Automatic Adjustment Mechanism of Pumping Unit

Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod

Study on the Dynamic Load and Mechanical Property of the Plunger Pump Crankshaft

Crankshaft Optimization Based on Experimental Design and Response Surface Method

Engine Multi-Body with Flexible Crankshaft Modeling and Numerical Simulation