Abstract:To improve the applicable performance of the engine and accomplish the determination of optimization, the crankshaft, as one of its essential components, is optimized based on experimental design and response surface method (RSM). First, the static analysis of the crankshaft is carried out. Over the solution, the maximum equivalent stress and deformation distribution of the crankshaft and the area with the most concentrated stress are obtained to provide the direction for subsequent optimization. Then the modal analysis is carried out to define the portions with large amplitude to prevent resonance. At the same time, based on the modal analysis results, the harmonic response of the crankshaft is examined to ensure that the crankshaft can avoid resonance and fatigue caused by forced vibration at different engine speeds. It also provides a theoretical basis for the further optimization design of the crankshaft. Then, through the experimental design and response surface optimization analysis, the optimization purpose of reducing the maximum equivalent stress, maximum deformation, and lightweight of the crankshaft is accomplished. Through the design expert software, the response surface model and fitting equation of the crankshaft are solved by the RSM, which provides a reference basis for optimizing the crankshaft. Finally, according to the optimization scheme, the crankshaft is reconstructed, and the optimized crankshaft model is compared with the original model. After optimization, the maximum equivalent stress is reduced by 9.43%, the maximum deformation is reduced by 3.68%, and the mass is reduced by 1.30%. At the same time, the first three natural frequencies are reduced by 10.28, 10.28, and 10.34%, which achieves the purpose of optimizing the crankshaft design. The research results provide effective theory and evidence for the structural design of the crankshaft.

Optimization Study of Engine Balance Shaft

Study of Automatic Dynamic Balancing System for Engine Crankshaft

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Application of multi-body dynamics simulation to predict the balance performance of diesel engines

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod

Crankshaft Optimization Based on Experimental Design and Response Surface Method

Multi-Objective Optimization of Counterweights: A Substitute for the Balance Shaft or Mass Unbalancing in Three-Cylinder Engines

The Simulation and Optimization Design of Adams-Based Engine Suspension System

Balancing Optimization of a Motorcycle Engine Crankshaft for Vibration Reduction

Simulation-based dynamic optimal design of crankshaft counterweights

Multi-Objective Optimization Design Method for Whole-Aeroengine Coupling Vibration

The Inner Equilibrium Analysis and Counterweight Design of Engine

Dynamic simulation research on diesel engine's cranktrain and block

Based on Analysis of Finite Element Analysis of Automobile Transmission Shaft Comprehensive Optimization

Balancing of Lightweight Crankshaft and its performance under Virtual Engine Operation

Dynamic Balancing Modal Analysis and Vibration Suppressing Design for Reciprocating Compressor Crankshaft

Analysis on Crankshaft System's Dynamical Behavior Based on Simulation and Experimental Methods

Engine Multi-Body with Flexible Crankshaft Modeling and Numerical Simulation

Influences of unbalance phase combination on the dynamic characteristics for a turboprop engine