Abstract:With ride comfort in a motorcycle gaining significance, it is important to minimize vibration levels at the customer touch points. The reciprocating piston imparts rotary motion to the crankshaft which in turn induces unbalance forces and produces vibration in the vehicle, thus influencing the ride quality. Generally, the primary inertial forces are balanced by a combination of balancer body and crank web. However, being a commuter bike, a balancer body could not be accommodated due to cost and space constraints. In such scenario, the first order unbalance force cannot be completely eliminated but can only be redistributed by adding counterweight to the crankshaft. Proper distribution of these forces is required for optimum vibration levels at motorcycle touch sensitive points (TSP) such as handle bar, footrest etc. In the current study, crankshaft of a single cylinder motorcycle engine is optimized for balancing to reduce vibration at the TSP through multi body dynamics (MBD) and finite element (FE) simulation tools. The complete crank train comprising of piston assembly, connecting rod, bearing, crankpin and crankshafts are modelled with accurate mass and inertia in a commercially available MBD software. Crankshaft balancing factor and the angle of unbalance force are varied by changing different design parameters of the crankshaft such as web radius and width, modification in shape etc. Inertia forces at engine mounting locations due to the first order unbalance of crankshaft are predicted using MBD simulation. These forces are then given as input to full vehicle FE model to predict the vibration response at TSP for the operating speed range of vehicle. Crankshaft design is finalized based on optimal vibration response at TSP.

Study on the Amplitude of Motorcycle Engine Unbalance Force

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Study of Automatic Dynamic Balancing System for Engine Crankshaft

Balancing Optimization of a Motorcycle Engine Crankshaft for Vibration Reduction

The Analysis for the Influence of Engine Excitation on the Dynamical Behavior of Motor Vehicle

Vibration Suppression of Additional Unbalance Caused by the Non-continuous Characteristics of a Typical Aero-Engine Rotor

Influence of mass unbalancing of three-cylinder engine on idle vibration based on powertrain model

RESEARCH ON THE PHYSICAL SIMULATION OF AUTO MOTORCYCLE BASED ON THE FINITE ELEMENT TECHNIQUE

STUDY ON AN ECCENTRIC SLIDE BLOCK BALANCING MECHANISM IN A SINGLE-CYLINDER ENGINE

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

The Crank Balance and Vibration Measurement on a Three-Cylinder Car Engine

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Study of the Effects of Unbalanced Cylinder Output Condition of Main Diesel Engine on Torsional Vibration Characteristics of Shafting System

Optimization Study of Engine Balance Shaft

Experimental study on controlling actively wheel unbalance vibration

A New Method of IC Engine Power Monitoring Based on the Harmonic Amplitude Characteristic of Crankshaft Torsional Vibration

Application of multi-body dynamics simulation to predict the balance performance of diesel engines

Investigation on Axial Vibration of High-Speed Vehicle Engine Crankshaft Based on Rayleigh Differential Method

Vibration characteristics of a high-speed turbocharger rotor with mass unbalance based on simulation and experiment

Balance mechanism design of single cylinder engine based on continuous mass distribution of connecting rod

Analysis and experiment on abnormal vibration for power assembly of diesel engine