Abstract:Surface angled cracks on critical components in high-speed machinery can lead to fractures under stress and pressure, posing a significant threat to the operational safety of equipment. To detect surface angled cracks on critical components, this paper proposes a “Quantitative Detection Method for Surface Angled Cracks Based on Full-field Scanning Data.” By analyzing different ultrasonic signals in the full-field scanning data from laser ultrasonics, the width, angle, and length of surface angled cracks can be determined. This study investigates the propagation behavior of ultrasonic waves and their interaction with surface angled cracks through theoretical calculations. The crack width is solved by analyzing the distribution of Rayleigh waves in the full-field scanning data. This paper also discusses the differences in ultrasonic wave propagation between near-field and far-field detection and identifies the critical point between these regions. Different computational methods are employed to calculate the inclination angle and the crack endpoint at various scan positions. Four sets of experiments were conducted to validate the proposed method, with results showing that the errors in determining the width, angle, and length of the surface angled cracks were all within 5%. This confirms the feasibility of the method for detecting surface angled cracks. The quantitative detection of surface angled cracks on critical components using this method allows for a comprehensive assessment of the component’s condition, aiding in the prediction of service life and the mitigation of operational risks. This method shows promising application potential in areas such as aircraft engine blade inspection and gear inspection.

Quantitative Damage Testing for Engine Blades with Flexible Electromagnetic Sensor

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Fatigue Crack Detection Based on Electromagnetic Testing

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Quantitative Nondestructive Estimation of Deep Defects in Conductive Structures

A Damage Detection Method Based on Flexible Macro-Fiber Composite

Impedance based damage detection under varying temperature and loading conditions

Electromechanical impedance method for damage detection of typical joint on jacket platform

Imaging and quantitative detection of complex defects with a flexible electromagnetic array sensor

Quantitative Detection Method for Surface Angled Cracks Based on Laser Ultrasonic Full-Field Scanning Data

Fatigue Damage Evaluation of Compressor Blade Based on Nonlinear Ultrasonic Nondestructive Testing

An electromechanical impedance approach for quantitative damage detection in Timoshenko beams with piezoelectric patches

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

An Electromechanical Impedance‐Based Imaging Algorithm for Damage Identification of Chemical Milling Stiffened Panel

AC Magnetic Flux Leakage Testing With Real-Time Liftoff Compensation Using Double Layer Parallel-Cable Probe

Model experiments of damaged structural identification based on electro-mechanical impedance technique

Quantitative Structural Damage Detection Using High-Frequency Piezoelectric Signatures Via The Reverberation Matrix Method

Development of a portable damage detection system based on electromechanical impedance technique for monitoring of bolted joint structures

Traditional Eddy Current⁻Pulsed Eddy Current Fusion Diagnostic Technique for Multiple Micro-Cracks in Metals