Abstract:In the field of non-destructive evaluation (NDE) of solid metal materials, it has been a challenge to detect surface and internal defects simultaneously by using a single physical mechanism technique. Conventionally, different testing techniques, in which each one is particularly sensitive to a certain type of defect, are employed to gain full defect information. However, a separated testing method is always a time-consuming and laborious work. Here, we report a magnetoelectric-ultrasonic hybrid transducer and multimodal system for quantitative NDE of metal, which integrates a magnetoelectric composite wrapped with a coil for generating alternating current field and simultaneously measuring magnetic abnormal of surface defects (referred to as ME-ACFM) and a dual-piezoceramic ultrasonic transducer (DP-UT) for generating acoustic pulses and detecting the echo signal of internal defects, respectively. A bipulse signal with different pulse widths is used for excitation of the hybrid transducer, in which one is corresponded to the resonant frequencies of 5 MHz for DP-UT, and another to 122 kHz for ME-ACFM. The huge difference between two resonant frequencies is helpful for restraining signal interference each other. Experimental investigations show that when scanning the tested specimens (standard steel No.45 and aluminum plates), the surface and internal defects information can be obtained simultaneously almost without a dead zone. The surface defect resolutions of 0.1 mm width and 0.1 mm depth, and the inside defect resolution of 2 mm blind hole are obtained; the experimental errors for surface defect (crack) depth up to 5 mm are around 5 %; while experimental errors for ultrasonic depth measurement (with a blind zone of 1.25 mm) is less than 0.63 mm. The proposed hybrid transducer and multimodal system open up a new way for designing multi-physical mechanism based NDEs.

Traditional Eddy Current⁻Pulsed Eddy Current Fusion Diagnostic Technique for Multiple Micro-Cracks in Metals

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Physic perspective fusion of electromagnetic acoustic transducer and pulsed eddy current testing in non-destructive testing system

An Online Monitoring Method for High- Temperature Environments Combining Eddy Current Testing and Electromagnetic Acoustic Transducer Techniques

Numerical study of phase space analysis for the development of subsurface crack detection method using pulsed eddy current

Pulse-Modulation Eddy Current Imaging for 3D Profile Reconstruction of Subsurface Corrosion in Metallic Structures of Aviation

A Method for Nondestructive Evaluation of Crack Depth on Metal Surface by Microwaves

Pulsed Eddy Current Nondestructive Testing for Defect Evaluation and Imaging of Automotive Lightweight Alloy Materials

Eddy Current Test/ultrasonic Testing Integrative Method for Detecting Sub-Surface Defects in Conductive Structures

The Evaluation of Pulsed Eddy Current Technique for Detection and Characterization of Surface Defect in Carbon Steel Welded Sample: An Experimental Study

A Composite Approach of Electromagnetic Acoustic Transducer and Eddy Current for Inner and Outer Corrosion Defects Detection

A Defect Detection Method for the Surface of Metal Materials Based on an Adaptive Ultrasound Pulse Excitation Device and Infrared Thermal Imaging Technology

A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal

Eddy Current Techniques for Detecting Hidden Subsurface Defects in Multilayer Aircraft Structures

Combining ultrasonic guided wave and low-frequency electromagnetic technology for defect detection in high-temperature Cr–Ni alloy furnace tubes

Nondestructive Testing of Local Incomplete Brazing Defect in Stainless Steel Core Panel Using Pulsed Eddy Current

A Study of the Automated Eddy Current Detection of Cracks in Steel Plates

Modelling and experimental study on pipeline defect characterisations using a pulsed eddy current measurement

Bottom Crack Detection with Real-Time Signal Amplitude Correction Using EMAT-PEC Composite Sensor

Advancing eddy current detection probes with magnetoelectric composite Materials: Enhancing crack detection in conductive materials