Abstract:Purpose Two corrosion inhibitors for closed cooling water systems, nitrite-based and mixture of nitrite and molybdate corrosion inhibitor, are often compared to each other. This study aims to optimize these two inhibitors in terms of concentration and pH for carbon steel protection, with insights into the double layer structure on surface and its impact on corrosion inhibition. Design/methodology/approach Electrochemical analysis including electrochemical impedance spectroscopy and potentiodynamic test are carried out for quick assessment of corrosion inhibition efficiency and optimization, which is confirmed by immersion test and microscopic analysis. The electronic properties of the surface film are analyzed through Mott–Schottky method which provides new insights into the inhibition mechanism and the role of each component in mixture inhibitor. Findings Mixture of nitrite and molybdate is shown to present higher inhibition efficiency, owning to the double layer structure. Nitrite alone can form a protective surface film, whereas molybdate leads to an n-type semiconductive film with lower donor density, hence giving rise to a better inhibition effect. Research limitations/implications Surface after inhibitor treatment has been carefully characterized to the microscopic scale, implying the effect of micro-structure, chemical composition and electronic properties on the corrosion resistance. Inorganic corrosion inhibitors can be tuned to provide higher efficiency by careful design of surface film structure and composition. Originality/value Almost every study on corrosion inhibitor applies such method for quick assessment of corrosion inhibition effect. Mott–Schottky test is one of electrochemical methods that reveals the electronic properties of the surface film. Previous works have studied the surface layer mainly through X-ray photoelectron spectroscopy. This study provides another insight into the surface film treated by nitrite and molybdate through Mott–Schottky analysis, and relates this structure to the corrosion inhibition effect based on multiple analysis including electrochemistry, microscopic characterization, thermodynamics and interface chemistry.

INVESTIGATION OF CORROSION INHIBITION PERFORMANCE OF ORGANIC AMINES IN CRUDE UNIT OVERHEAD COOLING SYSTEM

INFLUENCE OF ORGANIC AMINES ON CORROSION INHIBITION AND CF LIFE OF ALUMINOM ALLOY LY12

Effectiveness of an amine-based inhibitor—guanidine for steel in chloride-contaminated concrete

Development and Performance Evaluation of A Kind of Imidazoline Anti-high Temperature Acidizing Corrosion Inhibitor

Independent and joint inhibition effects of substrate-toxicants on anaerobic ammonia oxidation (anammox) enrichment culture

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Rust Prevention Property of a New Organic Inhibitor under Different Conditions

Theoretical Study to Evaluate Experimental Corrosion Inhibition of Ammonium Salt Derivatives for Mild Steel in Acidic Solution

Corrosion Performance of Carbon/stainless Steel in Amine‐based Solvents under Different Conditions for CO2 Chemical Absorption Process

In-depth experimental assessment of two new aminocoumarin derivatives as corrosion inhibitors for carbon steel in HCl media combined with AFM, SEM/EDX, contact angle, and DFT/MDs simulations

Corrosion Performance of A3 Carbon Steel in 30wt.% Mea and Amp-Mea Blends for Post-Combustion Carbon Capture: Effect and Mechanism of Corrosion Inhibitors

Electrochemical characteristics of the N,N-dipropynoxy methyl amine trimethyl phosphonate on pure iron in sulfuric acid solution

Experimental and computational study of the thermal degradation of primary amines used in CO 2 capture

Electrochemical Impedance and X-ray Photoelectron Spectroscopic Studies of the Inhibition of Mild Steel Corrosion in Acids by Cyclohexylamine

Inhibition and Desorption Behaviour of N,N-Dipropynoxy Methyl Amine Trimethyl Phosphonate in Hydrochloric Acid

Optimization of the Composition of an Imidazoline-Based Corrosion Inhibitor to Protect Equipment in Carbon Dioxide and Acidic Environments

Investigating the corrosion inhibition of aluminium by diamine derivatives in hydrochloric acid: a multi-technique approach

Mercaptopropionic acid-modified oleic imidazoline as a highly efficient corrosion inhibitor for carbon steel in CO2-saturated formation water

Optimization and understanding of corrosion inhibitors for cooling water system

Film-forming amines adsorption and corrosion kinetics on carbon steel surface in neutral solution investigated by EIS and PM-IRRAS analysis

Study on Corrosion in CO2 Chemical Absorption Process Using Amine Solution