Abstract:In the process of petroleum exploitation, in order to effectively inhibit the corrosion damage of acid to metal equipment. Mannich base corrosion inhibitors are generally added to inhibit the corrosion damage of acid. In order to enhance the solubility of Mannich base corrosion inhibitor. This paper intends to introduce hydrophilic groups to enhance the solubility of the Mannich base corrosion inhibitor. In this paper, two efficient corrosion inhibitors 3-(2-hydroxyethylamino)-1-phenylpropan-1-one (MY1) and 3-(2-aminoethylamino)-1-phenylpropan-1-one (MY2), were synthesized based on the Mannich reaction, using formaldehyde, acetophenone and ethanolamine/ethylenediamine as reaction raw materials. The corrosion inhibition performance of the inhibitor on N80 steel in 15% (mass fraction) hydrochloric acid solution was studied by means of the static weight loss method, electrochemical test and optical contact angle analysis. It could be seen from the static weight loss method that the corrosion rate in the hydrochloric acid solution before and after adding 0.7% (mass fraction) corrosion inhibitor concentration decreased from 129.39 g·m−2·h−1 to 1.45 g·m−2·h−1 and 2.79 g·m−2·h−1, respectively. The corrosion inhibition rate could reach 98%, indicating that both inhibitors had good corrosion inhibition performance, and the corrosion inhibition effect of MY1 was better than that of MY2. It was found from the electrochemical tests that the two inhibitors were mixed corrosion inhibitors mainly inhibiting the anodic reaction, and both inhibitors belonged to spontaneous adsorption, and their adsorption behaviors followed the Langmuir adsorption isotherm. In addition, the surface of N80 steel was characterized by SEM, EDS elemental mapping and contact angle measurement. The results show that a dense hydrophobic film is formed on the surface of the steel sheet after the addition of a corrosion inhibitor, which prevents corrosion.

Development and Performance Evaluation of A Kind of Imidazoline Anti-high Temperature Acidizing Corrosion Inhibitor

Synthesis of a New Water Injection Corrosion Inhibitor for Oilfield and Its Performance Evaluation

Preparation and Inhibition Performance of Aryl-Imidazoline Quaternary-Ammonium-salt Corrosion Inhibitor

Exploration of inhibitory performance of imidazoline on J55 steel

DEVELOPMENT OF IMIDAZOLINE CORROSION INHIBITOR FOR CORROSIVE MEDIA

Preparation of a Corrosion Inhibitor Preventing H2S Corrosion and Coupon Test

Study on Performance of New Corrosion and Scale Inhibitor Composed of CA/HEDP/IA-SSA Copolymer

Performance Research on Inhibition Zwitterionic Surfactant

The Behavior of Pre-Corrosion Effect on the Performance of Imidazoline-Based Inhibitor in 3 Wt.% NaCl Solution Saturated with CO2

Synthesis of naphthenic acid corrosion inhibitor and evaluation of its corrosion inhibition performance

Optimization of the Composition of an Imidazoline-Based Corrosion Inhibitor to Protect Equipment in Carbon Dioxide and Acidic Environments

INVESTIGATION OF CORROSION INHIBITION PERFORMANCE OF ORGANIC AMINES IN CRUDE UNIT OVERHEAD COOLING SYSTEM

PREPARATION OF A CORROSION INHIBITOR PREVENTING H_2S CORROSION AND COUPON TEST

Synthesis and Corrosion Inhibition Performance of 2-(1 ',3 '-Dioxolan-4 '-Yl) Benzimidazole

Development and Evaluation of Corrosion Inhibitor of Zinc in Acetic Acid

A New Imidazole Derivative for Corrosion Inhibition of Q235 Carbon Steel in an Acid Environment

THEORETICAL STUDY ON CORROSION INHIBITION PERFORMANCE OF IMIDAZOLINE INHIBITORS

Theoretically and Experimentally Exploring the Inhibition Effect of Imidazole Sulfonic Acid Derivatives with Multiple Adsorption Sites in 1.0 mol/L HCl

Synthesis of a Hydroxyl-Containing Corrosion Inhibitor and Its Inhibitory Performance on N80 Steel in Hydrochloric Acid Solution

Optimization of the Composition of an Imidazoline Corrosion Inhibitor for the Protection of Equipment in Carbon Dioxide-Rich and Acidic Environments

Evaluation of Corrosion Inhibitors Used in High-Temperature Naphthenic Acid Environment