Abstract:The self-regeneration of Ni-based catalysts has been considered as a promising approach to maintain not only a continuous but also economical process. However, the effect of catalyst nature, operating temperature, amount and types of carbon deposits on the effectiveness of the in-situ regeneration is still not well-investigated. Therefore, in this work, the self-regeneration ability of the undoped and Dy-doped Ni/SiO2 catalysts, which were prepared by the same impregnation method, were examined in the dry reforming of methanol. The physicochemical properties of the fresh and spent catalysts were analyzed by various techniques such as X-ray diffraction (XRD), hydrogen temperature-programmed reduction (H2-TPR), oxygen temperature-programmed desorption (O2-TPD), transmission electron microscopy (TEM), N2-BET isothermal adsorption. The nature and chemical reactivity of coke deposits formed during dry reforming at various temperatures (550, 600, and 650 °C) and the regeneration possibility of used catalysts through CO2 gasification at these temperatures were investigated by the in-situ temperature-programmed gasification by CO2 (TPCO2). The Dy additive significantly improves the dispersion of the nickel active sites of Ni/SiO2 catalyst, as demonstrated by the decreased Ni crystal size as well as the increased specific surface area and reduction degree of the catalyst. Furthermore, Dy promotion increases the quantity of oxygen vacancies and the nature of oxygen species, thereby improving the catalyst activity and stability. Specifically, methanol conversion dropped from 93% to 96%–61% and 31% for undoped Ni/SiO2 at 600 °C and 650 °C, respectively and from about 99% to 87% (at 600 °C) and 52% (at 650 °C) for Dy-doped catalyst.

EFFECTS OF CARBON AND SILICON DEPOSITION ON ACTIVITY OF HYDROGENATION CATALYST AND REGENERATION PERFORMANCE

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

Study on Deactivation by Sulfur and Regeneration of Pd/C Catalyst in Hydrogenation of N-(3-nitro-4-methoxyphenyl) Acetamide

Effects of Active Metal Modification on C9 Petroleum Resin Hydrogention Activity of Pd/γ-Al2O3 Catalysts

Influence of the Silicon Deposition on the Industrial Silicon Trapping Catalyst

Effects Of Promoters And Active Components On Performance Of Honeycomb Scr De-Nox Catalysts

Carbon Deposit Analysis in Catalyst Deactivation, Regeneration, and Rejuvenation.

Effects of Liquid Si-deposition Treatment on Structure and Reaction Stability of Catalyst for Ethanol Dehydration Producing Ethylene

Deactivation Mechanism of CeO2-Based Mixed Oxide Catalysts Supported on SiO2

Effect of coking and propylene adsorption on enhanced stability for Co2+-catalyzed propane dehydrogenation

A STUDY ON THE EFFECT OF PREPARATION PARAMETERS ON THE CATALYTIC PERFORMANCE AND ACTIVE COMPONENTS OF A NEW TYPE HYDRODESULFURIZATION CATALYST

The Influence of Metal Deposits on Residue Hydrodemetallization Catalysts in the Absence and Presence of Coke

Deactivation of Supported Skeletal Ni Catalyst and Effect of Regeneration Temperature on Its Catalytic Performance

Study On The Deactivation And Activity Regeneration Of Catalyst In Biomass Tar Cracking

Carbon deposition on catalyst during partial oxidation and reforming of CH4/C3H8 with CO2 to syngas

Investigation on coking deactivation behavior of molecular sieve catalysts

Analysis of the Coke Precursor on Bio-oil Refining Catalyst and the Regeneration of the Deactivated Catalyst

Effect of Liquid Passivation on the Oxidation Resistance and Hydrodesulfurization Activity of the NiMoS x /Al 2 O 3 Catalyst

Study on the Effect of Catalyst Properties on Residue Hydroconversion

Regeneration at Room Temperature for Amorphous Nib/Sio2 Catalyst Deactivated in Cyclopentadiene Hydrogenation

Deactivation and in-situ regeneration of Dy-doped Ni/SiO2 catalyst in CO2 reforming of methanol