Abstract:The self-regeneration of Ni-based catalysts has been considered as a promising approach to maintain not only a continuous but also economical process. However, the effect of catalyst nature, operating temperature, amount and types of carbon deposits on the effectiveness of the in-situ regeneration is still not well-investigated. Therefore, in this work, the self-regeneration ability of the undoped and Dy-doped Ni/SiO2 catalysts, which were prepared by the same impregnation method, were examined in the dry reforming of methanol. The physicochemical properties of the fresh and spent catalysts were analyzed by various techniques such as X-ray diffraction (XRD), hydrogen temperature-programmed reduction (H2-TPR), oxygen temperature-programmed desorption (O2-TPD), transmission electron microscopy (TEM), N2-BET isothermal adsorption. The nature and chemical reactivity of coke deposits formed during dry reforming at various temperatures (550, 600, and 650 °C) and the regeneration possibility of used catalysts through CO2 gasification at these temperatures were investigated by the in-situ temperature-programmed gasification by CO2 (TPCO2). The Dy additive significantly improves the dispersion of the nickel active sites of Ni/SiO2 catalyst, as demonstrated by the decreased Ni crystal size as well as the increased specific surface area and reduction degree of the catalyst. Furthermore, Dy promotion increases the quantity of oxygen vacancies and the nature of oxygen species, thereby improving the catalyst activity and stability. Specifically, methanol conversion dropped from 93% to 96%–61% and 31% for undoped Ni/SiO2 at 600 °C and 650 °C, respectively and from about 99% to 87% (at 600 °C) and 52% (at 650 °C) for Dy-doped catalyst.

Deactivation of Supported Skeletal Ni Catalyst and Effect of Regeneration Temperature on Its Catalytic Performance

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

Regeneration performance of supported skeletal Ni catalyst

Study on Deactivation by Sulfur and Regeneration of Pd/C Catalyst in Hydrogenation of N-(3-nitro-4-methoxyphenyl) Acetamide

Catalytic Dehydrogenation of Cyclohexane over Carbon Nanotubes-Supported Elecroless Nickel-plating Catalysts

Regeneration at Room Temperature for Amorphous Nib/Sio2 Catalyst Deactivated in Cyclopentadiene Hydrogenation

Deactivation and Regeneration of Catalyst for Steam Reforming of Bio-Oil to Produce Hydrogen

Regeneration Behaviors of Hydroisomerization Catalysts

Study on Regeneration of the Deactivated Catalyst Ni/Al2O3-MxOy Used for Hydrogenation of Gum Rosin.

Regeneration Behavior of Comercial Deactivated Mo-Ni/USY- Al_2O_3 Catalyst

Preparation of Supported Skeletal Ni Catalyst and Its Catalytic Performance on Dicyclopentadiene Hydrogenation

Influence of Oxidation Temperature on the Regeneration of a Commercial Pt-Sn/Al2O3 Propane Dehydrogenation Catalyst

Reactivity and Regeneration of Light Hydrocarbon Cracking Catalyst

DEACTIVATION OF THE CATALYST FOR TWO-STAGE HYDROGENATION OF 3-HYDROXYPROPIONALDEHYDE TO 1,3-PROPANEDIOL

Coking and Regeneration of Nickel Catalyst for the Cracking of Toluene As a Tar Model Compound

Deactivation and in-situ regeneration of Dy-doped Ni/SiO2 catalyst in CO2 reforming of methanol

Investigation on the deactivation of Pt/H-ZSM-22 catalyst for long-chain alkane isomerization

Study on Deactivation and Regeneration of Ni-loaded Nanocatalyst for Disproportionation of Gum Rosin

THE SELECTION OF CATALYSTS AND ITS DEACTIVATION-REGENERATION RESEARCH IN INTEGRATION OF HYDROGEN PRODUCTION FROM BIOMASS

Study on the syngas methanation of nickel-based catalyst

Hydrothermal Study of Pt–Sn-based SAPO-34 Supported Novel Catalyst Used for Selective Propane Dehydrogenation to Propylene