Abstract:The self-regeneration of Ni-based catalysts has been considered as a promising approach to maintain not only a continuous but also economical process. However, the effect of catalyst nature, operating temperature, amount and types of carbon deposits on the effectiveness of the in-situ regeneration is still not well-investigated. Therefore, in this work, the self-regeneration ability of the undoped and Dy-doped Ni/SiO2 catalysts, which were prepared by the same impregnation method, were examined in the dry reforming of methanol. The physicochemical properties of the fresh and spent catalysts were analyzed by various techniques such as X-ray diffraction (XRD), hydrogen temperature-programmed reduction (H2-TPR), oxygen temperature-programmed desorption (O2-TPD), transmission electron microscopy (TEM), N2-BET isothermal adsorption. The nature and chemical reactivity of coke deposits formed during dry reforming at various temperatures (550, 600, and 650 °C) and the regeneration possibility of used catalysts through CO2 gasification at these temperatures were investigated by the in-situ temperature-programmed gasification by CO2 (TPCO2). The Dy additive significantly improves the dispersion of the nickel active sites of Ni/SiO2 catalyst, as demonstrated by the decreased Ni crystal size as well as the increased specific surface area and reduction degree of the catalyst. Furthermore, Dy promotion increases the quantity of oxygen vacancies and the nature of oxygen species, thereby improving the catalyst activity and stability. Specifically, methanol conversion dropped from 93% to 96%–61% and 31% for undoped Ni/SiO2 at 600 °C and 650 °C, respectively and from about 99% to 87% (at 600 °C) and 52% (at 650 °C) for Dy-doped catalyst.

Regeneration performance of supported skeletal Ni catalyst

Deactivation and Regeneration of Raney-Ni Catalyst During Multiphase Dehydrogenation of Cyclohexane

Deactivation of Supported Skeletal Ni Catalyst and Effect of Regeneration Temperature on Its Catalytic Performance

Catalytic Dehydrogenation of Cyclohexane over Carbon Nanotubes-Supported Elecroless Nickel-plating Catalysts

Regeneration at Room Temperature for Amorphous Nib/Sio2 Catalyst Deactivated in Cyclopentadiene Hydrogenation

A novel regeneration method for deactivated commercial NH3-SCR catalysts with promoted low-temperature activities

Deactivation and Regeneration of Catalyst for Steam Reforming of Bio-Oil to Produce Hydrogen

Regeneration Behavior of Comercial Deactivated Mo-Ni/USY- Al_2O_3 Catalyst

Deactivation and in-situ regeneration of Dy-doped Ni/SiO2 catalyst in CO2 reforming of methanol

Study on Regeneration of the Deactivated Catalyst Ni/Al2O3-MxOy Used for Hydrogenation of Gum Rosin.

Study on Deactivation and Regeneration of Ni-loaded Nanocatalyst for Disproportionation of Gum Rosin

Study on regeneration characteristics and dust deposition mechanism of nickel based tar-cracking catalyst

Regeneration of Pd-Ni/γ-Al_2O_3 Catalysts for the Gas-Phase Decarbonylation of Furfural

Regeneration Behaviors of Hydroisomerization Catalysts

Coking and Regeneration of Nickel Catalyst for the Cracking of Toluene As a Tar Model Compound

Deactivation Mechanism and Feasible Regeneration Approaches for the Used Commercial NH3-SCR Catalysts

Study on the syngas methanation of nickel-based catalyst

Spontaneous regeneration of active sites against catalyst deactivation

Longevity increase of an impregnated Ni/CeO2-Al2O3 dry reforming catalyst by indium

Catalyst Deactivation and Regeneration Processes in Biogas Tri-Reforming Process. The Effect of Hydrogen Sulfide Addition

THE SELECTION OF CATALYSTS AND ITS DEACTIVATION-REGENERATION RESEARCH IN INTEGRATION OF HYDROGEN PRODUCTION FROM BIOMASS