Abstract:Ferritic hot rolling of low carbon steel is now widely adopted by steelmakers for reducing energy costs and increasing the yield. These ferritic hot-rolled coils carry forward different grain morphology and texture which result in variation in properties after cold rolling and annealing compared to austenitic hot-rolled coils. These ferritic hot-rolled coils require different annealing treatments based on the hot rolling temperature for better results. In the present work, a Nb–Ti stabilized interstitial free (IF) grade steel was hot rolled at two different temperatures in the ferritic regime in an industrial hot strip mill and was subsequently cold rolled. These cold-rolled sheets were subjected to different continuous annealing cycles with soaking temperatures varying from 740 to 820 °C on a thermo-mechanical simulator for optimization of temperatures and study its effect on microstructure and properties. These coils were compared with simulated conventional austenitic hot-rolled coils. Ferritic rolled coils show better elongation and a higher percentage of equiaxed grains indicating better formability. The optimum continuous annealing temperature was found to be a function of hot rolling temperature in the ferritic regime. Elongation and grain size increased with an increase in temperature in all the samples, but the ferritic rolled coils show faster change due to higher stored energy. Comparison of elongation and microstructure indicates that temperatures above 780 °C should be sufficient for achieving complete recrystallization in ferritic rolled samples, compared to 810 °C required in the conventional austenitic rolled sheets which is an industrial advantage. Based on simulation studies, full-scale plant continuous annealing was carried out under the optimized temperature conditions where microstructure and properties matched closely with the simulation results and electron backscatter diffraction (EBSD) analysis confirmed improved texture.

Batch annealing production process of Ti-IF steel in Hansteel

Recrystallization Law of Ti-IF Steel During Annealing Process

Effects of Bath Annealing Process on Microstructure Properties of Ti-IF Steel

Effect of Annealing Process on Microstructure and Mechanical Properties of Super Fine Grain IF Steel

The Influence of the Hot-Rolling Temperature on the Microstructure and Mechanical Properties of Ti-Nb Microalloyed 21%Cr Ferritic Stainless Steel

Equivalent Heat Treatments and Mechanical Properties in Cold-Rolled TiNiFe Shape-Memory Alloys

Effect of Annealing Temperature on Texture of Cold-Rolled IF Steel Rolled from Strip Hot-Rolled in Ferrite Region

Optimization of Annealing Parameters for Ferritic Hot-Rolled IF Grade Steel

Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets

The Effect of Annealing Treatment on the Microstructure and Texture of a Cold-Rolled TiNiFe Shape Memory Alloy Tube

Investigation on Processing for a Titanium-Microalloyed Hot Rolled Dual Phase Steel

Experimental Study and Thermodynamic Analysis of Inclusion Precipitation During Solidification in 12% Cr Alloy

The Influences of Process Annealing Temperature on Microstructure and Mechanical Properties of Near Β High Strength Titanium Alloy Sheet.

Effect of Ti on Formability of IF Steels

Static Recrystallization Behavior and Texture Evolution during Annealing in a Cold Rolling Beta Titanium Alloy Sheet

Influence of Heat Treatment on the Texture, Microstructure and Tensile Deformation Behaviours of Cold Rolled FeCoNiCr Sheets

Control of TiN precipitation behavior in titanium-containing micro-alloyed steel

Effect of annealing temperature on properties and second phase characteristics of 443 stainless steel hot-rolled sheets

Effect of Coiling Temperature on Ti(C,N) Precipitation and Properties of Batch Annealed DC06EK Enamel Steel

Effect of Cold Rolling Reduction Ratio on Microstructure and Mechanical Properties of Fe–10Mn–4Al-0.4C Steel Containing Δ Ferrite

Study on Recrystallization Behavior of Ti45Nb Titanium Alloy