Abstract:The paper describes physical and numerical simulations of a manufacturing process composed of hot forging and controlled cooling, which replace the conventional heat treatment technology. The objective was to investigate possibilities and limitations of the heat treatment with the use of the heat of forging. Three steels used to manufacture automotive parts were investigated. Experiments were composed of two sets of tests. The first were isothermal (TTT) and constant cooling rate (CCT) dilatometric tests, which supplied data for the identification of the numerical phase transformation model. The second was a physical simulation of the sequence forging-cooling on Gleeble 3800, which supplied data for the validation of the models. In the numerical part, a finite element (FE) thermal-mechanical code was combined with metallurgical models describing recrystallization and grain growth during forging and phase transformations during cooling. The FE model predicted distributions of the temperature and the austenite grain size in the forging, which were input data for further simulations of phase transformations during cooling. A modified JMAK equation was used to calculate the kinetics of transformation and volume fraction of microstructural constituents after cooling. Since the dilatometric tests were performed for various austenitization temperatures before cooling, it was possible to include austenite grain size as a variable in the model. An inverse algorithm developed by the authors was applied in the identification procedure. The model with optimal material parameters was used for simulations of hot forging and controlled cooling in one of the forging shops in Poland. Distributions of microstructural constituents in the forging after cooling were calculated. As a consequence, various cooling sequences during heat treatment could be analyzed and compared.

Review of Numerical Simulation for the Cooling Process of the Structural Steel Hot Forging

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation of Water Air Alternative Quenching Process for Large Steel Forging

Numerical simulation of microstructure evolution of flange axle during hot forging

Physical and Numerical Simulations of Closed Die Hot Forging and Heat Treatment of Forged Parts

Review of Numerical Simulation for Extrusion Process of Aluminum Alloy Profile

Numerical Simulation of Pre-forging for Connecting Rod of Automobile Engine and Optimization of Its Pre-forging Billet

AN OVERALL NUMERICAL SIMULATION OF HOT METAL FORMING

Finite element analysis of heavy forging processing with JTS method

Numerical Simulation and Experimental Study on Forging Process of Ultra-Super-critical HP-IP Rotor Steel

Numerical Simulation on Austenitization of Cast Steel During Heating Process

A Numerical Simulation of Microstructure Evolution of IN718 Alloy During Multi-step Forging

Numerical simulation of casting-forging integrated breakdown process

NUMERICAL SIMULATION OF DYNAMIC DECRYSTALLIZATION DURING HOT FORGING

Numerical Simulation of Metal Quenching with Consideration of Influence of Temperature and Phase Transformation

The Numerical Simulation of Large Cylinder Forging in Forging Process under High Temperature

Microstructural modeling and numerical simulation of multi-physical fields for martensitic stainless steel during hot forging process of turbine blade

Numerical Simulation Of The Austenitizing Process In Hypoeutectoid Fe-C Steels

A numerical model coupling phase transformation to predict microstructure evolution and residual stress during quenching of 1045 steel

NUMERICAL SIMULATION ON HEATING PROCESSOF 9Cr2Mo COLD ROLLER