Abstract:Abstract The objective of this work is to analyze residual strains and stresses and volumetric expansion due to phase transformations that occur during quenching of a steel body. Three different models are proposed, based on the finite element software ABAQUS ® and on the use of FORTRAN subroutines. The time-tempreature-transformation (TTT) or continuous-cooling-transformation (CCT) diagrams of SAE 4140 steel are represented differently in each model, depending on the transformed phases and correspondent volumetric expansion. In the first model, diagrams are intentionally simplified in order to consider only the austenite-martensite transformation. In the second model, the thermomechanical-phase transformation coupling is represented through the incorporation of the austenite-pearlite transformation into the TTT diagram used in the first model and considering that this transformation occurs for cooling rates lower than the limit for martensitic transformation. The third model is based on a subroutine that calculates all the microstructures resulting from quenching (ferrite, pearlite, bainite, and martensite), depending on cooling rate. This subroutine includes information from all the TTT and CCT diagrams of SAE 4140 into a FORTRAN code. Model testing was conducted based on the analysis of the quenching of a cylinder with diameter of 45 mm and based on the comparison with results presented in the literature. Significant differences are observed in the numerical results provided by each model, which, in some cases, also provided data with significant differences from literature.

Numerical Simulation of Metal Quenching with Consideration of Influence of Temperature and Phase Transformation

Numerical Simulation of Thermal Stress Fields During Gas Quenching

Finite Element Simulation of Metal Quenching

A numerical model coupling phase transformation to predict microstructure evolution and residual stress during quenching of 1045 steel

Numeric simulation on the effect of phase transformation on quenching stress of 22CrMo steel

Coupling Simulation of Temperature, Phase-transformation and Stress in Quenching Process Based on Non-linear Finite Element Method

Numerical Simulation of Thermal Stress Fields in the Magnetic Quenching Process of 45 Steel

Numerical Simulation of Eccentric Cylinder Quenching Process

FEM Simulation of Quenching Process and Experimental Verification of Simulation Results

Numerical Simulation of the Mechanical Properties of 40cr Steel During Laser Quenching

Numerical Simulation of the Mechanical Properties of Cr12 Steel During Gas Quenching

Metallo-Thermo-Mechanical coupled analysis of quenching process for the plane strain problems

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams

The FEM Simulation and Experiment of Quenching Distortion of a U-shape Sample and the Sensitivity Analysis of Material Properties

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Numerical Simulation of Water Air Alternative Quenching Process for Large Steel Forging

FEM Simulation of Temperature,phase-Transformation and Stress/strain in Quenching Process

3-D FEM Simulation of the Temperature Field During Quenching Process

Numerical Simulation on Temperature and Microstructure During Quenching Process of Large-sized AISI P20 Steel Die Blocks

Numerical Simulation of High Pressure Gas Quenching Process