Abstract:Spheroidized ferrite-cementite steel (SFC) is susceptible to micro-defects owing to the mismatched deformation between the ferrite and cementite during cold forming, which seriously deteriorates the fatigue life. However, the damage mechanism related to microstructural features in the SFC steel during cold deformation has not been fully investigated, hindering control of the microstructure and forming process. This study presents a method coupled with experiments and multiscale simulations to research the damage mechanisms and the dependence of microstructure features under uniaxial tension in SFC steel. In situ tensile test revealed three damage mechanisms in SFC steel under uniaxial tension: cementite cracking, ferrite/cementite interface debonding, and ferrite cracking. In particular, the final fracture was mainly dominated by the ferrite/cementite interface debonding. In multiscale simulations, the macroscale tensile and nanoindentation simulations were carried out to obtain the strain history and mechanical properties of the mesoscale simulations, respectively. The mesoscale IP-based RVE and CP-based unit cells simulations were performed to capture the driving forces from the three damage mechanisms and the dependence of microstructural features, respectively. The nanoscale molecular dynamics simulation was conducted to identify the model parameters of cohesive zone model (CZM) in the mesoscale simulations. The numerical results indicated that particle-cracking void occurred when the internal von Mises stress exceeded the ultimate strength of the cementite particles. Interface-debonding void nucleated when the load on the particle was insufficient to resist its strength. Matrix-cracking should be attributed to the stress concentration caused by the dislocation pile-up or the crossing of multiple slip bands. In addition, interfacial debonding were more likely to occur in the stable orientations and high-angle grain boundaries of ferrite matrix. Compared with a circular cementite particle, an elliptical particle was more prone to cause interfacial debonding. Also, the ferrite/ferrite grain boundary showed earlier interfacial debonding perpendicular to the loading direction than parallel to the loading direction.

Microstructure-Based FEM Modeling of Phase Transformation During Quenching of Large-Size Steel Forgings

A numerical model coupling phase transformation to predict microstructure evolution and residual stress during quenching of 1045 steel

Numerical Simulation of Water Air Alternative Quenching Process for Large Steel Forging

Modelling of Q&P Steel Heat Treatment Process Based on Finite Element Method

Phase-field simulation and high-temperature confocal laser scanning microscope experimental study of Martensite transformation during the disk laser quenching process

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Numerical simulation and experimental validation of microstructure evolution during the upsetting process of a large size martensitic stainless steel forging

Modeling Direct Quenching Effects on Microstructural Evolutions in AISI 4140 Steel: A Finite Volume Approach

Finite Element Simulation of Metal Quenching

Numerical Simulation of Metal Quenching with Consideration of Influence of Temperature and Phase Transformation

Prediction of Internal Stresses in Large-Size Work Pieces During Intensive Quenching Based on Temperature-Microstructure-Stress Coupled Model

Mathematical Simulation and Experimental Verification of Carburizing Quenching Process Based on Multi-Field Coupling

Size Effects in Residual Stress Formation during Quenching of Cylinders Made of Hot-Work Tool Steel

Modeling Microstructure Development upon Continuous Cooling of 42CrMo4 Steel Grade for Large-Size Components

Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams

Model of stress-induced phase transformation and prediction of internal stresses of large steel workpieces during quenching

Automated Workflow for Phase‐Field Simulations: Unveiling the Impact of Heat‐Treatment Parameters on Bainitic Microstructure in Steel

A micro mechanical study on tensile behavior of steel sheets with spheroidal cementite using crystal plasticity finite element method

Investigation of damage mechanisms related to microstructural features of ferrite-cementite steels via experiments and multiscale simulations

Experimental Study of Microstructure Evolution During Tempering of Quenched Steel and Its Application

Predictions and measurements of residual stresses from forging and heat treatment