Abstract:In this research, the cast-homogenized Mg-9Gd-3Y (GW93) alloy was subjected to isothermal hot compression tests at different temperatures ranging from 300 to 450 °C and different strain rates from 0.001 to 1 s -1 , and its hot compression deformation characteristic was studied. With the aid of the dynamic material model and the Murty instability criterion, a 3-dimensional (3D) hot processing map describing the intrinsic processability of the material was established. Through the secondary development, the 3D hot processing map of GW93 alloy was then imported into the finite element software DEFORM-3D, implementing backward extrusion forming simulation of thin-walled tubes under various process parameters. The power dissipation coefficient was utilized to evaluate the material's formability after the deformation. The effects of deformation temperature and extrusion speed on the formability of thin-walled tubes were studied, and the process parameters were optimized to 430 °C and 0.25 mm/s. Afterward, the thin-walled tubes with an outer diameter of 40 mm, wall thickness of 2 mm and height of 50 mm were prepared by practical backward extrusion experiments under 3 different groups of parameters. The present study suggests that under the parameters of 430 °C and 0.25 mm/s, the thin-walled tube was granted with an intact appearance and undergo a secure deformation. Furthermore, its microstructure was characterized by the presence of fine recrystallized grains. The surfaces of the thin-walled tubes would be prone to cracking under the other 2 groups of parameters (430 °C/0.1 mm/s and 410 °C/0.25 mm/s), with clearly visible cracks observed under an optical microscope.

Research on the shape of glass pad for hot extrusion of stainless steel tube

Lubrication Behavior of the Glass Lubricated Hot Extrusion Process

Glass Lubrication Technology in Steel Hot Extrusion

FEM Analysis of Hot-Pressing Process of Aspheric Glass P-SK57 Lens

FEM Simulation of Glass Lubrication During Section Extrusion of Titanium Alloy

Influences of Model’s Shape on Molding Time in Glass Molding Press

Experimental Study on Heat Transfer Boundary Conditions for Steel Hot Extrusion Process

Boundary Parameters During Glass Lubricated Hot Extrusion of Steel Pipes

Investigation on heat transfer coefficient of glass lubricated interface between P92 heat-resistant steel and H13 steel

Analysis of breakthrough extrusion pressure for large scale steel pipe

Influence of billet fillet on outside surface of extrusion stainless tube

Deformation behavior and load analysis of TP304 stainless steel billet during hot expansion process

Optimization of Hot Backward Extrusion Process Parameters for Seamless Tube of Mg-8Gd-3Y Alloy by Finite Element Simulation

Hot Gas Pressure Forming and Post Aging Treatment of Ti-22Al-24.5Nb-0.5Mo Square Tubes

Push-bending Process of Stainless-Steel Tubes: Experiment and Simulation

Impact of Drawing Machine Parameters on Force and Energy Consumption in Borosilicate Glass Tube Production

Optimization Design Combined Thermal & Deformation Evaluation for A Precision Hot-Pressing Furnace

Hot extrusion forming process of pipe with tail cushion

Research into the properties and microstructure of ZA13 alloy tubes formed by liquid extrusion

Research on Extrusion Process of 316LN Stainless Rectangle Thick-Wall Tube Used in ITER Top and Bottom Correction Coils

Optimization of Hot Backward Extrusion Process Parameters for Thin-Walled Tubes of Mg-9Gd-3Y Alloy Based on 3D Processing Maps