Abstract:The A15 phase superconductor Nb3Al has been considered as an alternative to Nb3Sn for high field and large scale applications. However, to prepare a stoichiometric Nb3Al with fine grain structures is very difficult. High-energy ball milling is a solid state powder processing technique and is a very useful for preparing Nb-Al alloys (Nb3Al). The effects of ball milling time and annealing temperature on the formation of Nb3Al superconducting phase have been studied. Pure Nb and Al powders with stoichiometric ratio of Nb3Al were mixed and milled, and the charging and milling were performed in an inert atmosphere. Phase formation and structural evolution during high-energy ball milling have been examined by X-ray diffraction. Al disappeared and Nb peaks broadened after about one hour of milling. With increasing milling time, the peaks of Nb became considerably broader and intensities decreased, the Nb-Al solid solution phase was extensive when milled about 3 hours. In order to obtain Nb3Al superconducting phase, a subsequent anneal was required. We have annealed the as-milled powders at 800-900°C for different times to prepared Nb3Al superconducting alloy. The results indicated that Nb3Al with small amount of impurity phase can be obtained on annealing the Nb-Al solid solution phase and the superconducting transition temperature was about 15K, but it is difficult to obtain a homogeneous Nb3Al phase by annealing the amorphous powder.

Synthesis of AlN from Al2O3activated by plasma assisted ball milling

Synthesis of Nano-Size AlN Powders by Carbothermal Reduction from Plasma-Assisted Ball Milling Precursor

In Situ Synthesis of AlN Nanoparticles by Solid State Reaction from Plasma Assisted Ball Milling Al and Diaminomaleonitrile Mixture

Synthesis of Aluminum Nitride Powders from A Plasma-Assisted Ball Milled Precursor Through Carbothermal Reaction

Effect of Different Precursors on Synthesized AlN by Plasma-Assisted Ball Milling

AlN ceramics synthesized by carbothermal reduction of mechanical activated Al2O3

Direct Synthesis of AlN Nano Powder by Dielectric Barrier Discharge Plasma Assisted High-Energy Ball Milling

Mechanical activation assisted combustion synthesis of AlN-Al2O3 composite ceramic powder

Synthesizing AlN powder by mechanochemical reaction between aluminum and melamine

Comparative Research of Plasma-Assisted Milling and Traditional Milling in Synthesizing AlN

Preparation of Nb3al by High-Energy Ball Milling and Superconductivity

Phase Transformation and Gas–solid Reaction of Al2O3 During High-Energy Ball Milling in N2 Atmosphere

On Advancemeat of Carbothermal Reduction of Alumina by High Energy Ball Milling

Nano-sized amorphous alumina particles obtained by ball milling ZnO and Al powder mixture

Preparation of AlN Powder of Low Oxygen Content Via Carbothermal Reduction and Nitridation by Active Gas Exchange Technique

Evolution of Metal Nitriding and Hydriding Reactions During Ammonia Plasma-Assisted Ball Milling

Effects of NH4Cl on the synthesis of aluminum nitride by the spontaneous combustion of mechanically activated aluminium powder

Synthesis of aluminum nitride by nitridation of γ-Al 2O3 nanopartlcles in flowing ammonia

Synthesis of Ultrafine AlN Powders in an Al-OC-N System

Mechanism and Kinetics Analysis of AlN Combustion Synthesis

AlN Powder Synthesis by Sodium Fluoride-Assisted Carbothermal Combustion