Abstract:Titanium nitride (TiN) films synthesized by multi-arc ion plating (AIP) normally have a columnar microstructure, and are likely to induce surface defects due to the formation of macroparticles and neutral particles in the vicinity of cathode arc sources. Hence, the achievable microhardness of the normal AIP TiN films only ranges between 20 similar to 30 GPa. A systematic study for fabricating an adherent nano-superhard titanium nitride (TiN) film on M2 high speed steel substrate by a vacuum cathode multi-arc ion-plating (ALP) system was initiated. To understand the relationship of the film processing-structure-property, their microhardness, film-to-substrate adhesion, frictional property, and microstructure of the film were investigated using Vickers hardometer, scratch tester, ball-on-disc tester, X-ray diffractometer, and transmission electron microscope. Results show that: (i) the achievable film microhardness ranges between 35 GPa and 45 GPa; (ii) the critical load (Lc) of the superhard TiN film is at 64 N approximately; (iii) the friction coefficient, under a high-load and a high rotating-speed, of the film is ranging from 0.5 to 0.8; and (iv) the nm scale mean main grain-sizes of the film are approximately 12.7 nm for TiN111, 19.7 nm for TiN200 and 9.6 nm for TiN220. The maximum achievable microhardness 45 GPa is more than twice of the 22 GPa for standard TiN film. Such hardness enhancement is anticipated as mainly due to: (a) the formation of nanoscaled crystalline grains; (b) the preferential orientation and growth of grains in the close-packed plane (111); and (c) the induced residual stress within the film by ion bombardment.

A Combined Ion Plating-Chromizing Process on High Speed Steel Substrate

ADHERENT NANO-SUPERHARD TITANIUM NITRIDE FILM AND ITS FORMING MECHANISM IN MULTI-ARC ION-PLATING SYSTEM

Microstructure and Mechanical Properties of TiAlCrN and TiAlCrN/CrN Composite Coatings by Arc Ion Plating

Microstructures and Mechanical Properties of (Ti,Cr)N Composite Coatings Grown by Arc Ion Plating

Study on Nitriding and Multi-Arc Ion Plating on M2 and H13 Steel

Nanocrystallite Superhard Titanium Nitride Film In Multi-Arc Ion Plating

Study on Complex Chromizing at 550℃ for H13 Steel

Microstructure and properties of TiCrN coatings by arc ion plating

Preparation of the Ti(C,N) Film by Ion Plating and Its Oxidation Resistance

Microhardness of the TiFeCrN Film-Substrate Composites Obtained by Cathodic Arc Ion Plating

High Temperature Sliding Wear Behaviors of Ion Plating Tin Composite Coating with Ion Nitriding As Interlayer on Hot Work Die Steel

Microstructure Analysis on the Surface Modified Layer of Martensite Heat Resistant Steel by Multi-arc Ion Plating

Multiple Needle Cathodes Plasma Surface Alloying of Ti6Al4V with W-Mo-C-N

Multi-arc Ion Plating Of(ti,cr) N Film on Rivet Punch

Modification of Combined Nitriding Plus Ion Implantation to M2 High Speed Steel

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Study on performance and microstructure of TiAlCrFeSiBN films

Tribological Properties and Preparation of (Ti,Al)N Coatings on High Speed Steel Substrate

Formation of hard surface layer on austenitic stainless steels via simultaneous chromising and nitriding by pack cementation process

Structure and Wear Resistance of the Multi-Arc Ion Plated Coating on TC11 Alloy

A New Method to Obtain TiN-Ti(C,N)Composite Film