Abstract:The results of studies on thermodynamics of martensitic transformation in Fe-C and Fe-X-C alloys lead the Ms temperature in structural steels to be predicted. Establishing thermodynamics of martensitic transformation in Cu- and Fe-Mn-Si based alloys built the basis of composition and processing design for Cu- and Fe- based shape memory alloys. The thermodynamic approach for calculation of Ms in ZrO2 containing ceramics and corrected formula expressing the effect of parent grain size on Ms were suggested. The revised kinetics equation of a thermal martensitic transformation shows that alloying element varying the diffusion coefficient of carbon in low-carbon steels would affect the amount of the retained austenite and it will be beneficial for the exploitation of steels with microstructure of lath martensite. Research on the isothermal kinetics of the retained austenite→martensite in GCrl5 ball bearing (AISI 52 100) steel indicates that the dimensional stability (as comparison to specimen treated by traditioinal quenching and tempering) increases 34％ in specimen treated by an isothermal holding in order to form a few percent of isothermal martensite from the retained austenite after quenching and followed by normal tempering and the contact fatigue life is not reduced. Studies of characteristics of martensitic transformations and their reverse transformations in Ni-Ti, Cu-Zn-Al, Fe-Mn-Si based alloys and ZrO2 containing ceramics reveal the factors affecting the shape memory effect (SME) and indicate the way to improve the SME as well as the exploitation of these materials. Thermodynamics study of bainitic transformation, observation of the growth ledge, studies on the effect of parent strengthening on transformations and the results of internal friction measurements all display that the bainite formation is controlled by diffusion. Addition of alloying elements hindering the diffusion of Zn and Al in Cu-Zn-Al may improve the SME and its service life. There exists the hainitic transformatioin in CeO2-ZrO2 and it relates to the appearance of brittleness in ZrO2 containing ceramics. Research on the ordering of β phase in Cu-Zn is significant for the application of alloy with ordered phase. The presentation of the criterion of spinodal decomposition in ternary alloys may be valuable for the development of alloys exhibiting high damping capacity or high strength by means of spinodal decomposition. Group theory is successfully utilized in crystallography of phase transformation. The required condition for the appearance of crystallography reversibility derived from group theory is the formation of single variant martensite. It seems effective that the soliton is introduced in the nucleation and growth model in phase transformation.

Influences of V and Ti on Isothermal Transformation Kinetics and Formed Microstructure in Fe-C Alloys

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Quantitative Analysis on Carbide Precipitation in V-Ti Microalloyed TRIP Steel Containing Aluminum

Understanding the Role of Carbon Atoms on Microstructure and Phase Transformation of High Nb Containing Tial Alloys

MICROSTRUCTURE AND PHASE TRANSFORMATION DURING ANNEALING OF RAPIDLY SOLIDIFIED Al-Fe-Ti-C ALLOY

Insights into the Martensitic Transformation Kinetics and Mechanical Properties of Quaternary Ti–Ni–Nb–V Shape Memory Alloys

Influence of Ti on Solid Microstructure and Phase Transformation of Cu75Cr25 Alloy at Different Cooling Conditions

Role of Microalloying Elements on Recrystallization Kinetics of Cold-Rolled High Strength Low Alloy Steels

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Novel transformation pathway and heterogeneous precipitate microstructure in Ti-alloys

Studies on Phase Transformations and Their Applications in Materials Engineering

Effect of Mg–Ti Treatment on Nucleation Mechanism of TiN Inclusions and Ferrite

Effect of Ti/V Ratio on Thermodynamics and Kinetics of MC in Γ/α Matrices of Ti–V Microalloyed Steels

The Role of MX Carbonitrides for the Particle-Stimulated Nucleation of Ferrite in Microalloyed Steel

Microstructures and Transformation Characteristics of Thin Films of Tinicu Shape Memory Alloy

Alloying Design of Titanium Aluminum Intermetallics and Research Progress

Influence of Ti Content on the Partial Oxidation of TixFeCoNi Thin Films in Vacuum Annealing.

In-Situ Observation On The Influences Of Ti On Phase Transformation Of Weld Metal Processed By High-Heat Input Welding

Drastic enhancement in hot-workability and microstructural refinement of TiAl alloys via martensitic transformation: A comparative study

On the massive transformation in TiAl-based alloys

Effect of Ti and Al on Microstructure and Partitioning Behavior of Alloying Elements in Ni-based Powder Metallurgy Superalloys