Abstract:Structure-property relationship in vanadium micro-alloyed TRIP steel is investigated focusing on austenite transformation, precipitation behavior and mechanical performance. Microstructural evolution of the steel during processing was characterized mainly using EBSD, TEM and APT techniques; and its influence on mechanical properties was discussed. The TRIP steel exhibits complex microstructure including intercritical ferrite (IF), bainitic ferrite (BF), retained austenite (RA) and martensite. After identical intercritical annealing (IA), IF fraction keeps constant, BF and RA fractions increase while martensite fraction decreases with decreasing isothermal bainite transformation (IBT) temperature from 470 to 380 degrees C. The initially precipitated vanadium carbides (VC) in the hot-rolled specimen undergo coarsening during IA process, accompanied with some newly precipitated VC in either ferrite or in austenite, confirmed by the co-existence of small-sized and coarsened VC after IA process, as well as occurrence of K-S orientation relationship between VC and the & alpha;-Fe matrix. Ultra-fine average grain size of less than 1 & mu;m in the TRIP heat-treated steel is achieved by the refining effect of these nanoscale VC precipitates, which can inhibit phase boundary (PB) migration during IA process and promote bainite transformation during subsequent IBT process. The higher volume fraction of RA accompanied with higher carbon enrichment intensifies sustainable strain hardening and finally increased ductility of the specimens treated under lower IBT temperature. In the IBT-380 specimen with the highest RA and BF fractions, the occurrence of micro-yielding phenomenon is a result of the Cottrell atmosphere in soft domain BF and stress relaxation due to RA to martensite transformation, during which the soft domain IF/RA/BF and hard domain martensite yields step by step. An excellent mechanical performance is thus achieved in the IBT-380 specimen, meeting the requirements for the 3rd generation advanced auto-steel.

Quantitative Analysis on Carbide Precipitation in V-Ti Microalloyed TRIP Steel Containing Aluminum

MICROSTRUCTURE, MECHANICAL PROPERTIES AND INTERPHASE PRECIPITATION BEHAVIORS IN V-Ti MICROALLOYED STEEL

Comparative Study of VC, NbC, and TiC Interphase Precipitation in Microalloyed Low-carbon Steels

Quantitative analysis of precipitation and strengthening mechanisms of V and V-Ti hot-rolled microalloyed steels

Rietveld Quantitative Analysis of Carbides Precipitation in Normalized-Tempered 2.25Cr-1Mo-0.25v Steel

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Microstructure and mechanical properties of hot-rolled Nb-V-Ti microalloyed TRIP steel based on dynamic transformation of undercooled austenite

Structure-property Relationship in Vanadium Micro-Alloyed TRIP Steel Subjected to the Isothermal Bainite Transformation Process

Influence of V on the Microstructure and Precipitation Behavior of High-Carbon Hardline Steel during Continuous Cooling

Investigations of Solidification Structures of High Carbon Alloy Cast Steel Containing RE-V-Ti

Effects of Ti and a Twice-Quenching Treatment on the Microstructure and Ductile Brittle Transition Temperature of 9crwvtin Steels

Quantitative Carbide Analysis Using the Rietveld Method for 2.25cr–1mo–0.25v Steel

Role of Microalloying Elements on Recrystallization Kinetics of Cold-Rolled High Strength Low Alloy Steels

Effect of Ti/V Ratio on Thermodynamics and Kinetics of MC in Γ/α Matrices of Ti–V Microalloyed Steels

BEHAVIOUR OF FINE V-Ti COMPLEX CARBONITRIDE IN 09mnvtin MICROALLOYED STEEL DURING REHEATING

Bainite Transformation and TRIP Effect in 20mn2sivb Steel

Quantitative characterization of lamellar α precipitation behavior of IMI834 Ti-alloy in isothermal and non-isothermal heat treatments

Characterization of Nano-Sized Precipitation and Dislocations and the Correlation with Mechanical Properties of a Low Alloy TRIP-aided Steel

Microstructure and Mechanical Properties of Microalloyed High-Strength Transformation-Induced Plasticity Steels

Effect of Ti and rare earth on microsegregation and large-sized precipitates of H13 steel

Microstructural Evolution and Precipitation Strengthening In a New 20Cr Ferritic Trial Steel