Abstract:Recrystallized binary Mo-0.2 wt.% Si (Mo-0.68 at.% Si) and Mo-0.3 wt.% Si (Mo-1.0 at.% Si) alloys and a ternary Mo-0.75 wt.% Si-0.14 wt.% B (Mo-2.5 at.% Si-1.2 at.% B) alloy were tested in uniaxial tension as a function of temperature in vacuum and the results are compared to previous results on recrystallized commercial purity (CP) Mo and a binary Mo-0.1 wt.% Si (Mo-0.34 at.% Si) solid solution alloy. Yield strength increases with increasing Si content at all temperatures examined except at room temperature where the 0.1 wt.% Si alloy demonstrates softening; atomistic simulation confirms this behavior to be associated with Si segregation to the core and the associated ease of kink nucleation. Tensile ductility at room temperature rapidly deteriorates with increasing Si content in solid solution but in the Mo-0.3 wt.% Si solid solution alloy, tensile ductility of ~10% was measured at 300°C and thereafter, it increases rapidly at higher temperatures. Serrated flow occurs in the temperature range 600°C~800°C with the serration amplitude increasing with increasing Si content; atomistic simulation illustrates O trapping by Si in solid solution and subsequent de-trapping/release at higher temperatures that can account for the onset temperature delay of serrated flow in these Mo-Si solid solution alloys relative to commercial purity Mo. The serrated flow phenomenon is accompanied by significant work hardening; the presence of dislocation tangles, dipoles and prismatic loops in specimens fractured above ≥ 700°C accounts for the observed work hardening.

Three Point Bending Behavior of Mo-MoSi2 Functionally Gradient Material

The Characters of Mo-Mosi2 Functionally Graded Coating

Progress in Research on Mo-Mosi2 Functionally Gradient Material

Microstructure and Phase Transformation Behavior of Mo–MoSi 2 Gradient Material

Effect of Siliconizing Temperature on Microstructure and Phase Constitution of Mo–MoSi2 Functionally Graded Materials

Microstructure and Oxidation Behavior of Si–MoSi2 Functionally Graded Coating on Mo Substrate

The character of Mo-MoSi2 gradient material layer made by ihrigizing

Tensile Properties and Strengthening Mechanisms of Mo–Si Alloy

Phase composition and mechanical properties of in-situ synthetic Mo-Si compound composites

BENDING MECHANICAL PROPERTIES AND ITS EVALUATION OF ALUMINIUM ALLOY MATRIX GRADIENT COMPOSITES REINFORCED WITH SiC PARTICLES

Microstructure and mechanical properties of a Mo-toughened Mo 3 Si-based in situ nanocomposite

Delamination of MoS2/SiO2 Interfaces under Nanoindentation.

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite

First‐Principles Study on Electronic and Elastic Properties of Co, Ni, Cu, and Mo‐Doped Β‐Si3N4

Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites

Effect of Liquid-Phase Siliconizing Process on Silicon Diffusion Behavior in Mo Matrix

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite

Mechanical Performance of ZrO2-Ni Functionally Graded Material by Powder Metallurgy

Structural, mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater

First principles study on the phase stability and mechanical properties of MoSi2 alloyed with Al, Mg and Ge

Effect of Si Content on the Uniaxial Tensile Behavior of Mo-Si Solid Solution Alloys

Three Point Bending Behavior of Mo-MoSi2 Functionally Gradient Material

The Characters of Mo-Mosi2 Functionally Graded Coating

Progress in Research on Mo-Mosi2 Functionally Gradient Material

Microstructure and Phase Transformation Behavior of Mo–MoSi 2 Gradient Material

Effect of Siliconizing Temperature on Microstructure and Phase Constitution of Mo–MoSi2 Functionally Graded Materials

Microstructure and Oxidation Behavior of Si–MoSi2 Functionally Graded Coating on Mo Substrate

The character of Mo-MoSi2 gradient material layer made by ihrigizing

Tensile Properties and Strengthening Mechanisms of Mo–Si Alloy

Phase composition and mechanical properties of in-situ synthetic Mo-Si compound composites

BENDING MECHANICAL PROPERTIES AND ITS EVALUATION OF ALUMINIUM ALLOY MATRIX GRADIENT COMPOSITES REINFORCED WITH SiC PARTICLES

Microstructure and mechanical properties of a Mo-toughened Mo 3 Si-based in situ nanocomposite

Delamination of MoS2/SiO2 Interfaces under Nanoindentation.

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite

First‐Principles Study on Electronic and Elastic Properties of Co, Ni, Cu, and Mo‐Doped Β‐Si3N4

Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites

Effect of Liquid-Phase Siliconizing Process on Silicon Diffusion Behavior in Mo Matrix

Effect of Mo Addition on Microstructure and Properties of Nb/Nb&lt;sub&gt;5&lt;/sub&gt;Si&lt;sub&gt;3&lt;/sub&gt; In-Situ Composite

Mechanical Performance of ZrO2-Ni Functionally Graded Material by Powder Metallurgy

Structural, mechanical and tribocorrosion performances of CrMoSiN coatings with various Mo contents in artificial seawater

First principles study on the phase stability and mechanical properties of MoSi2 alloyed with Al, Mg and Ge

Effect of Si Content on the Uniaxial Tensile Behavior of Mo-Si Solid Solution Alloys

Effect of Mo Addition on Microstructure and Properties of Nb/Nb<sub>5</sub>Si<sub>3</sub> In-Situ Composite