Abstract:Upon free solidification of a deeply undercooled melt, the solute diffusion in both the interface and the bulk liquid is far from equilibrium, and the concentration and the fluid flow may also play an important role in the solidification. Thus, under such conditions, assumptions about local equilibrium, ideal dilute solution solidification and solidification free of fluid flow can no longer be valid. In the present work, first, in order to reveal the concentration effect, we compared the results of the non-equilibrium dendrite growth models describing the solidification of dilute and non-dilute undercooled melts. It was found that under local non-equilibrium conditions, the predicted results of the non-dilute solution model and the dilute solution model are to a certain extent different from each other at the intermediate undercooling range. It was also found that the concentration effect could substantially decrease the relaxation effect. Second, we considered the effect of fluid flow on the rapid solidification of an undercooled melt. It was found that the fluid flow would affect not only the size of the dendrite tip radius, mainly at the small undercooling range, but also the dendrite growth velocity at the intermediate undercooling range. In particular, fluid flow makes the sizes of the dendrite tip radius at high undercooling close to those predicted by the dilute model. Thus, fluid flow could make the non-dilute solution exhibit dilute solution solidification behaviors. It was also found that fluid flow reduces the relaxation effect to some extent. Considering the fluid flow effect, we used an extended chemical superheating model to predict the dendrite remelting phenomenon of the non-dilute melt. The model predicted that the dendrite remelting phenomenon would abruptly disappear once the dendrite growth velocity exceeded the solute diffusion velocity in a bulk undercooled melt. Third, considering the fluid flow effect, we used the concept of equivalent undercooling and a recently developed physical model to calculate the stress accumulation during rapid solidification. The results of this new model could explain well the stress-induced dendrite breakup mechanism of grain refinement at high undercooling.

Static Shearing Rheological Behavior of Semi-solid A356 Alloy

The Influences of the Microstructure Morphology of A356 Alloy on Its Rheological Behavior in the Semi-Solid State

Unexpected Dynamic Recrystallization Behavior of Ti-7Cu Alloy in Semi-Solid State

Rheological Behavior of Semisolid A356 Alloy with Different Morphology of Primary Α Phases

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Rheologic Properties of Aluminum Alloy A356 Bille ts Produced by Semisolid Continuous Casting Process

Numerical Simulation of Recalescence of 3-Dimensional Isothermal Solidification for Binary Alloy Using Phase-Field Approach

Fatigue property of semisolid A357 aluminum alloy under different heat treatment conditions

Concentration and Fluid Flow Effects on Kinetics, Dendrite Remelting and Stress Accumulation Upon Rapid Solidification of Deeply Undercooled Alloys

Phase-field Simulation of Secondary Dendrite Growth in Directional Solidification of Binary Alloys

Simulation for microstructure evolution of Al-Si alloys in solidification process

Direct Numerical Simulation of Solid Deformation During Dendritic Solidification

Dependence of microstructure and mechanical properties on solidification condition of directionally solidified Zn-55Al-1.6Si alloys

Development of Rheometer for Semi-Solid High-Melting Point Alloys

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Melt flow-induced mechanical deformation of dendrites in alloy solidification: A coupled thermal fluid - solid mechanics approach

Dynamic shear behavior of forged CrMnFeCoNi high entropy alloy using hat-shaped specimens over a wide range of temperatures and strain rates

Three-Dimensional Dendritic Morphology and Branching Mechanism in Directionally Solidified Mg-Zn Alloy

Rheological Behavior of the A356 Alloy in the Semisolid State at Low Shear Rates

Study on Mechanism of Microstructure Refinement by Ultrasonic Cavitation Effect

Research of Dendrite/Cellular Interfacial Transitional Velocity in Directionally Solidified Al-4%Cu Alloy