Abstract:Effects of process parameters on microstructure and mechanical properties of the AM50A magnesium alloy components formed by double control forming (DCF) were investigated via a four-factor and four-level orthogonal experiment. The variable curves of DCF showed that the forging procedure was started in the following 35 ms after the injection procedure was completed. It was confirmed that the high-speed filling and high-pressure densifying were combined together in the DCF process. Better surface quality and higher mechanical properties were achieved in the components formed by DCF as compared to die casting (DC) due to the refined and uniform microstructure with a few defects or without defects. Injection speed affected more effectively the yield strength (YS), ultimate tensile strength (UTS) and elongation as compared to pouring temperature, die temperature and forging force. But the pouring temperature had a more significant effect on hardness as compared to injection speed, die temperature and forging force. Pouring temperature of 675 °C, injection speed of 2.7 m/s and forging force of 4000 kN except for die temperature were the optimal parameters for obtaining the highest YS, UTS, elongation and Vickers hardness. Die temperatures of 205, 195, 195 and 225 °C were involved in achieving the highest YS, UTS, elongation and Vickers hardness, respectively. Obvious microporosity and microcracks were found on the fracture surface of the components formed by DC, deteriorating the mechanical properties. However, the tensile fracture morphology of the components formed by DCF was characterized by ductile fracture due to a large number of dimples and no defects, which was beneficial for improving the mechanical properties.

Influence of Processing Parameters on Microstructure and Mechanical Properties of Die Casting AM50 Alloy

Microstructure and mechanical properties of AM50 alloy according to thickness and forming condition of the products by a high pressure die-casting process

Melt Superheating on the Microstructure and Mechanical Properties of Diecast Al-Mg-Si-Mn Alloy

Effect of process parameters on microstructure and properties of AM50A magnesium alloy parts formed by double control forming

Weibull Statistical Analysis of the Effect of Melt Conditioning on the Mechanical Properties of AM60 Alloy

Effect of Solutionising and Ageing on the Microstructure and Mechanical Properties of a High Strength Die-Cast Al–Mg–Zn–Si Alloy

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Influence of Different Pouring Temperature to Properties and Organization of A356 Aluminum Alloy under Specified Conditions

Microstructure and mechanical properties of low pressure die cast AM50 magnesium alloy

Effects of Vacuum Die Casting Processing Parameters on Mechanical Properties of AM50 Magnesium Alloy

Study on Die Casting Technology and Casting Soundness of AM50 Magnesium Alloy

Effect of Alloying with Al, Nd and Ca and Heat Treatment on Microstructures and Mechanical Properties of Vacuum Die-Cast AM50 Alloy

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effects of Alloy Materials and Process Parameters on the Heat Transfer Coefficient at Metal/Die Interface in High Pressure Die Casting

Low-pressure die casting of magnesium alloy AM50: Response to process parameters

Processing Technology and Mechanical Properties of Die-Cast Magnesium Alloy AZ91D

Research on the Influence of Die Casting Process on Structure and Performance of Magnesium Alloy

Influence of Processing Parameters on Interfacial Heat Transfer Coefficient at the Metal-Die Interface of Die Cast Am50 Alloy

Effects of processing parameters on grain size in die casting magnesium alloy AZ91HP castings

Microstructure and Mechanical Properties of Thin-Wall and High-Rib Parts of AM60B Mg Alloy Formed by Double Control Forming and Die Casting under the Optimal Conditions

Microstructure and Properties of AZ91D Magnesium Alloy in Combination Process of Die Casting with Forging