Abstract:This paper investigates the machinability and microscopic surface damage mechanisms of aluminum alloy 7075 subjected to different heat treatment processes during micro-cutting. Focusing on T6 and T73 heat-treated aluminum alloy 7075, the study employs a combination of experiments and simulations to analyze micro-cutting surface morphology, cutting forces, microstructure evolution, residual stress, and damage characteristics. The findings reveal that micro-cutting of aluminum alloy 7075 after T6 heat treatment exhibits no apparent speed sensitivity in the primary cutting force, while T73 heat treatment demonstrates noticeable speed sensitivity. The surface microscopic damage during micro-cutting is influenced by both cutting speed and depth, resulting in distinct forms and degrees of damage under varying conditions.An analysis of the residual compressive stress field indicates that the magnitude of residual compressive stress on the micro-cutting surface determines crack initiation, and the maximum depth of residual compressive stress dictates crack propagation. Microscopic damage in T6 heat-treated aluminum alloy 7075 predominantly occurs in the second and third deformation zones, while T73 heat treatment leads to most damage in the third deformation zone. Notably, crack propagation is evident in T6 heat treatment at any cutting speed with a cutting depth of 150 μm, whereas it is inconspicuous in T73 heat treatment at cutting speeds below 540 m/min. Furthermore, at cutting speeds below 540 m/min and a cutting depth of 150 μm, T6 heat-treated micro-cutting is prone to oxidative wear. In contrast, at a cutting speed of 72 m/min and a cutting depth of 150 μm, the predominant wear form in T73 heat-treated micro-cutting is oxidation wear.This study underscores the intricate interplay between heat treatment processes, cutting conditions, and microscopic damage in aluminum alloy 7075 micro-cutting. The nuanced insights provided contribute to a deeper understanding of the machining characteristics of this alloy, paving the way for improved processing methodologies.

Research on Hot Rolling Process of 7075 Aluminum Alloy

Microstructure and Properties Evolution of 7075 Al alloy in Hot Rolling and Short Process Heat Treatment

Effects Of Rolling Process On Microstructure And Mechanical Property Of 7050 Aluminum Alloy

Microstructures and Mechanical Properties of 7075 Aluminum Alloy Semi-solid Billet by Hot Rolling

Effect of rolling deformation and passes on microstructure and mechanical properties of 7075 aluminum alloy

Effect of hot rolling reduction rate on semi-solid microstructure of 7075 aluminum alloy

Microstructure Evolution of the Near-Surface Deformed Layer and Corrosion Behavior of Hot Rolled AA7050 Aluminum Alloy

Hot tensile deformation behavior and microstructure evolution of 7075 aluminum alloy sheet

Effect of thermomechanical processing on mechanical properties and microstructural evolution of Al-Mg-Zn alloy

Mechanical Property and Microstructure of Rolled 7075 Alloy under Hot Compression with Different Original Grains

Effect of rolling reduction rate on the forming of microstructures on the surface of 2024 aluminum alloy

Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing

Microstructure evolution and deformation behavior of TIG welded 7075-T6 aluminum alloy followed by partial hot rolling

Hot deformation characteristics and processing maps of AA7075-H18 alloy sheet under hot forming process conditions

Investigation on the damage mechanism of micro-cutting surface layer of aluminum alloy 7075 with different heat treatment processes

Effects of cryorolling, room temperature rolling and aging treatment on mechanical and corrosion properties of 7050 aluminum alloy

Edge-crack free and high mechanical properties of AA7075 sheets by using cryorolling and subsequent aging

Evolution of microstructure and properties of AA 7072/7075/7072 composite sheets during various finish rolling temperature

Effect of die coating on surface crack depth of hot extruded 7075 aluminum alloy

Hot deformation behavior and microstructure evolution model of 7055 aluminum alloy

Effect of Heat Treatment Conditions on Mechanical Properties and Precipitates in Sheet Metal Hot Stamping of 7075 Aluminum Alloy