Abstract:The present work aims to provide fundamental insights into the grain size dependence and mechanical behavior of hot-pressed Al2O3-ZrO2 ceramic at its eutectic composition, and further to explore the hardening effect of laser-induced surface nanoeutectic layer. The underlying correlations between densification behavior, grain size distribution and mechanical properties were elucidated. Sintering at 1550 degrees C promotes the densification without extensive grain growth, and in this case the sample exhibits a critical density of 99.3 %. The average grain size is tailored into a range of 0.6-0.9 mu m, and the measured flexural strength and toughness reach 1100 MPa and 11 MPa.m(1/2), respectively. The metastable t-ZrO2 grains indeed play a pivotal role in energy dissipation at the crack tip through crack deflection and branching. In addition, the mechanical behavior is reasonably explained through constructing a multilevel toughening mechanism map associated with grain size distribution of ZrO2. Particularly, surface nanocrystallized Al2O2-ZrO2 eutectic layer with a thickness of 1000 mu m free of pores and cracks is achieved by a rapid laser melting process. The outmost laser-modified nanoeutectic layer exhibits a fine cellular structure with an interphase spacing of only 105 nm and a hardness of as high as 26.1 GPa, which provides a promising potential in enhancing significantly the hardness and wear resistance for applications as sliding ceramic components.

The Effect Surface Roughness on Mechanical Properties of ZrB2 Based Ultra High Temperature Ceramic with WEDM

Experimental Reasearch on Grinding Surface Waviness of Engineering Ceramics

Study on E lectro-discharge M achining C haracteristics of Z rB 2-based U ltra-high T em perature C eram ics

Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics

Research and Development of ZrB2-based Ultra-high Temperature Ceramics

MECHANICAL AND WEAR PROPERTIES OF ZTA CERAMICS

High-temperature deformation of ZrB2 ceramics with WC additive in four-point bending

Effects of ZrO2 ceramics doped with varying content on the mechanical properties and energy release characteristics of W-Zr alloys

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Microstructure and Mechanical Properties of Zrb2-Based Composites Reinforced and Toughened by Zirconia

Study on the ZrB2-SiCw Ultrahigh Temperature Ceramics

Processing and characterization of ZrB2–SiCW ultra-high temperature ceramics

Outstanding Mechanical and Ablation Resistance of C/C–ZrC–W Composites Prepared Via Slurry Impregnation and Reactive Melt Infiltration at 1500 ℃

Fabrication and Precision Electromachining Technology of ZrB2-SiC Ceramic Composites

Effects of processing parameters on the surface roughness of Zr-based bulk metallic glass processed by wire electrical discharge machining

The hybrid effect of SiC whisker coupled with ZrO 2 fiber on microstructure and mechanical properties of ZrB 2-based ceramics

Microstructure and mechanical properties of ZrB2-based UHTC via reactive hot pressing

A Novel Development of Zrb2/Zro2 Functionally Graded Ceramics for Ultrahigh-Temperature Application

Research Progress on Brazing and Wetting of Zirconia Ceramic

Grain Size Dependence, Mechanical Properties and Surface Nanoeutectic Modification of Al2O3-ZrO2 Ceramic

Study on Machining Method of Ultra High Tem perature Ceramic with Different Types Surface