Abstract:Cutting force is one of the most basic signals that can reflect the information of the cutting process, so it is very necessary to study the strain elastic element of strain gauge wireless rotating dynamometers. This paper proposes a strain elastic element with a double-layer cross floating beam that can be applied to the strain gauge wireless rotating dynamometer, which can simultaneously obtain the four-component cutting force/torque information of FX, FY, FZ, and MZ. Based on the proposed strain elastic element, a compact strain gauge wireless rotating dynamometer is designed, which is composed of a tool holder, upper connection flange, strain elastic element, lower connection flange, tool base, and data acquisition and wireless transmission system. The static model of the double-layer cross floating beam on the strain elastic element is established by the segmented rigid body method, and the relationships between the material, force, structural parameters, and the strain and deformation of the floating beam are obtained. The static model is consistent with the finite element solution, which proves the rationality of the static model. Based on the established static model, the sequential quadratic programming algorithm is used to optimize the structural parameters of the double-layer cross floating beam to maximize the sensitivity of the floating beam. The overall structure of the strain elastic element is analyzed by finite element software, and the strain of the structure under simulation conditions is obtained, which provides a reference for subsequent calibration tests and circuit design. The calibration matrix and dynamic performance of the strain elastic element are obtained by the static calibration test, dynamic calibration test, and cutting test. The results show that the proposed strain elastic element has high sensitivity and low cross-sensitivity error, and can be applied to the strain gauge wireless rotating dynamometer to measure medium- and low-speed cutting forces.

Design and Experiment of Electromagnetic Force Device for Optical Fiber Fusion Stretching

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

Controlling Force in Polarization-Maintaining Fiber Fused Biconical Tapering

Method of controlling drawing force in the fused biconical tapering process and simulation of electro-magnetic force

Stretchable electromagnetic fibers for self-powered mechanical sensing

Monolithically Integrated Stretchable Photonics

Integrated Photonics Put at Full Stretch: Flexible and Stretchable Photonic Devices Enabled by Optical and Mechanical Co-Design

Multiflexoelectric Actuation and Control of Beams

Thermally Drawn Stretchable Electrical and Optical Fiber Sensors for Multimodal Extreme Deformation Sensing

Research Progress On Flexible Photonic Materials And Devices

A Customized Nonlinear Micro-Flexure for Extending the Stable Travel Range of MEMS Electrostatic Actuator

Design of a Novel Tensile Testing Device and Its Application in Tensile Testing Experiments on Copper Micro Wires

Magnet-coil Force Actuator for Microtensile Test Device

An Ultrawide Range, Highly Stretchable Liquid Metal Force and Strain Sensor Based on Spiral Multilayer Microfluidic Fibers

Finite Element Analysis of Stiffness Characteristics of an Electromagnetic Device

Fibre-based Stretchable Electrodes for Flexible Metamaterial Electronics: A Review

Electromagnetic Functionalized Ultrafine Polymer/γ-Fe2o3 Fibers Prepared by Magnetic-Mechanical Spinning and Their Application As Strain Sensors with Ultrahigh Stretchability

Research of Optical Fiber Coil Winding Model Based on Large-deformation Theory of Elasticity and Its Application

High precision epidermal radio frequency antenna via nanofiber network for wireless stretchable multifunction electronics

Stretchable Conductive Fibers Based on a Cracking Control Strategy for Wearable Electronics

Design and Research of a Strain Elastic Element with a Double-Layer Cross Floating Beam for Strain Gauge Wireless Rotating Dynamometers