Abstract:The direct current circuit breakers are considered a promising option to protect the transmission line against commonly appearing line-to-ground fault. However, the challenges of losses in the nonoperational stage, escalation of response against fault current, and large fault current handling capability remain the debatable issues for direct current circuit breakers. This paper introduces a novel topology of the hybrid circuit breaker with fault-current-limiting characteristics, which contains three branches: the main branch, fault-current-limiting branch, and energy absorption branch. The main branch includes a mechanical switch, breaker impedance, and bidirectional power electronics switches. In the fault-current-limiting branch, a fault-current-limiting circuit is introduced which contains n numbers of bidirectional switches and current-limiting inductors, which are connected in series to make the design modular in nature. During the normal working stage, the current flows through the main branch of the breaker. Once a fault in the system is confirmed, the fault current is transferred to the fault-current-limiting branch. At this stage, the intensity of the fault current is reduced significantly using the fault-current-limiting circuit, and finally, the residual current is shifted to the energy absorption branch. The working principle, design considerations, and parametric analysis concerning the design of hybrid circuit breakers are incorporated in this paper. The performance of the proposed breaker is evaluated using a three-terminal voltage-source converter-based high-voltage direct current transmission network; for this purpose, a PSCAD/EMTDC simulation tool is used. The performance of the proposed breaker is also compared with other topologies. The comparative analysis shows that the proposed breaker is a good alternative considering high fault current interruption requirements, response time against fault current, and power losses.

A new solid-state high voltage direct current circuit breaker with series-connected SCR technology

Study on reliability improvement of current-transferring type HVDC circuit breaker

A Scheme for Current-limiting Hybrid DC Circuit Breaker

Current-transferring High Voltage DC Breaker

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

A DC Circuit Breaker Based on Superconducting Current-Limiting Technology

Novel Hybrid DC Circuit Breaker Based on Series Connection of Thyristors and IGBT Half-Bridge Submodules

High-Performance and Economical Forced Resonant DC Circuit Breaker: Topology, Design, and Development

DC Circuit Breaker Using Superconductor for Current Limiting

Low Voltage DC Solid-State Circuit Breaker with Soft Turn-off and Self-Charging Operation

Research on the Breaking Branch for a Hybrid DC Circuit Breaker In±500 Kv Voltage‐sourced Converter High‐voltage Direct Current Grid

A novel current-limiting hybrid DC breaker based on thyristors

A Hybrid Circuit Breaker with Fault Current Limiter Circuit in a VSC-HVDC Application

Research on Key Technology of Voltage Balanced Based on High-voltage Solid-state Breaker

Thyristor Based Hybrid Arc-less High Voltage Direct Current Circuit Breaker

Superconducting Magnetic Energy Storage-Based DC Circuit Breaker for HVDC Applications

The Design and Development of a Novel 10 Kv/60 Ka Hybrid DC Circuit Breaker Based on Mixed Solid-State Switches

A State-of-the-Art 500-Kv Hybrid Circuit Breaker for a Dc Grid: the World's Largest Capacity High-Voltage Dc Circuit Breaker

A low-cost current flow controlling interline hybrid circuit breaker combined with SCR and H-bridge sub-module

Technical Assessment on Self-Charging Mechanical HVDC Circuit Breaker

A Cost-Effective Current-Limiting Hybrid DC Circuit Breaker Based on Hybrid Semiconductors