Abstract:The direct current circuit breakers are considered a promising option to protect the transmission line against commonly appearing line-to-ground fault. However, the challenges of losses in the nonoperational stage, escalation of response against fault current, and large fault current handling capability remain the debatable issues for direct current circuit breakers. This paper introduces a novel topology of the hybrid circuit breaker with fault-current-limiting characteristics, which contains three branches: the main branch, fault-current-limiting branch, and energy absorption branch. The main branch includes a mechanical switch, breaker impedance, and bidirectional power electronics switches. In the fault-current-limiting branch, a fault-current-limiting circuit is introduced which contains n numbers of bidirectional switches and current-limiting inductors, which are connected in series to make the design modular in nature. During the normal working stage, the current flows through the main branch of the breaker. Once a fault in the system is confirmed, the fault current is transferred to the fault-current-limiting branch. At this stage, the intensity of the fault current is reduced significantly using the fault-current-limiting circuit, and finally, the residual current is shifted to the energy absorption branch. The working principle, design considerations, and parametric analysis concerning the design of hybrid circuit breakers are incorporated in this paper. The performance of the proposed breaker is evaluated using a three-terminal voltage-source converter-based high-voltage direct current transmission network; for this purpose, a PSCAD/EMTDC simulation tool is used. The performance of the proposed breaker is also compared with other topologies. The comparative analysis shows that the proposed breaker is a good alternative considering high fault current interruption requirements, response time against fault current, and power losses.

A novel multi-port hybrid high voltage DC circuit breaker commutated by controllable active oscillation circuit

An Integrated Multi-Port Hybrid DC Circuit Breaker for VSC-based DC Grids

A multiport hybrid DC circuit breaker with high economic efficiency and adaptive reclosing capability

Multiport Hybrid DC Circuit Breaker With Reduced Fault Isolation Time and Soft Reclosing Capability

Current-transferring High Voltage DC Breaker

Multi-Port Hybrid DC Circuit Breaker Based on Bridge Commutation Branch

Novel Hybrid DC Circuit Breaker Based on Series Connection of Thyristors and IGBT Half-Bridge Submodules

New multi-port hybrid DC circuit breaker for DC power grids

A Scheme for Current-limiting Hybrid DC Circuit Breaker

A novel controllable capacitor commutation based superconducting hybrid direct current breaker

Hybrid HVDC Circuit Breakers with an Energy Absorption Branch of a Parallel Arrester Structure

A Cost-Effective Current-Limiting Hybrid DC Circuit Breaker Based on Hybrid Semiconductors

An economical hybrid DC circuit breaker with pre-current-limiting capability

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

A Hybrid Circuit Breaker with Fault Current Limiter Circuit in a VSC-HVDC Application

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

Research on the Current Commutation in a Novel Hybrid HVDC Circuit Breaker

Hybrid MVDC Circuit Breaker Based on Enhanced Arc Voltage of Vacuum Interrupter

Potentials of Hybrid HVDC Circuit Breakers'Application to MMC-HVDC Grid

A low-cost current flow controlling interline hybrid circuit breaker combined with SCR and H-bridge sub-module

Diode-Bridge Multiport Hybrid DC Circuit Breaker for Multiterminal DC Grids