Abstract:To improve the interruption capability and reduce the semiconductor cost of the hybrid DC circuit breaker,we proposed a new hybrid DC circuit breaker topology with bidirectional interruption based on forced zero crossing series-connected thyristors technique.By analyzing the breaking principle,we derived the parameters of voltage balancing circuit for the series-connected thyristors and diodes valves during the reverse recovery stage.Then,taking a 10 kV prototype for example,we carried out the devices selection and parameters design of the main and transfer branch.At last,a 10 kV DC breaker principle prototype and its test circuit were set up.The study results show that,in normal operation,the mechanical switch and small amount of series-connected full-controlled devices in main branch handle the low conduction loss.In case of interruption,the fault current is commutated to thyristors valve,and the current of thyristors valve is forced to zero by injecting current inversely for turning offthyristors.At last the inductive energy is dissipated by the energy absorbing branch.The principal prototype breaks the short current of 8.8 kA peak value under 10 kV voltage where the interruption time is less than 3 ms.The voltage rating and fault current withstanding capability of the breaker can be easily improved by adjusting the series-connected number and type of the semiconductor devices in the transfer branch.The diode valves can suppress the over-voltage of thyristor devices during reverse recovery under the high current interruption transient condition to decrease the risk of damage for thyristors.There is no need to adjust triggering time and match parameters for thyristors in series during the commutation and interruption stage of the hybrid breakers.In conclusion,the proposed hybrid DC breaker has the short-circuit fault fast cleating capability,so it is more suitable for the practical project of the future flexible high-voltage DC grid.

Novel Hybrid DC Circuit Breaker Based on Series Connection of Thyristors and IGBT Half-Bridge Submodules

A novel current-limiting hybrid DC breaker based on thyristors

Development of a Thyristor-Assisted Hybrid DC Circuit Breaker for Reduced Cost and Size

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

A low-cost current flow controlling interline hybrid circuit breaker combined with SCR and H-bridge sub-module

The Design and Development of a Novel 10 Kv/60 Ka Hybrid DC Circuit Breaker Based on Mixed Solid-State Switches

A Multi‐Port Current‐Limiting Hybrid DC Circuit Breaker Based on Thyristors

A Cost-Effective Current-Limiting Hybrid DC Circuit Breaker Based on Hybrid Semiconductors

A hybrid DC circuit breaker based on a generalized H-bridge circuit

A Scheme for Current-limiting Hybrid DC Circuit Breaker

A Novel Bidirectional Nonuniform Hybrid Circuit Breaker Considering Different Direction Protection Requirements

Hybrid HVDC Circuit Breaker Based on Series-connected Thyristors with Forced Zero Crossing Technique

A multiport hybrid DC circuit breaker with high economic efficiency and adaptive reclosing capability

A Passive Hybrid HVDC Circuit Breaker Based on Thyristors

Low-Cost HVdc Circuit Breaker With High Current Breaking Capability Based on IGCTs

Research on the Current Commutation in a Novel Hybrid HVDC Circuit Breaker

A Novel Series-Type Hybrid Circuit Breaker With Simple Start-Up Operation and Low Device Cost for Low-Voltage DC Distribution Networks

A Novel Mixture Solid-State Switch Based on IGCT with High Capacity and IGBT with High Turn-off Ability for Hybrid DC Breakers.

Hybrid Multilevel Converters Based on Thyristor Alternate-arms

Current-transferring High Voltage DC Breaker

A Series-Type Dual-Coupled-Inductors based Hybrid Circuit Breaker with Simple Start-Up Operation and Adaptive Reclosing Capability