A multiport hybrid DC circuit breaker with high economic efficiency and adaptive reclosing capability

Xiaolong Chen,Ning Zhou,Yongli Li,Bin Li,Botong Li,Jiashuo Liu

DOI: https://doi.org/10.1016/j.epsr.2023.109485

IF: 3.818

2023-05-19

Electric Power Systems Research

Abstract:In a high voltage direct current (HVDC) grid, hybrid DC circuit breakers (HCBs) are one of the effective solutions to interrupt fault currents. The conventional two-port HCB features high economic costs since the expensive insulated gate bipolar transistors (IGBTs) are needed. Each line in the multiterminal HVDC grid must be equipped with the HCB, which is extremely costly to implement. In addition, the likelihood of temporary faults is considerably raised by the fact that the HVDC grid transfers power across overhead lines (OHLs). By reclosing operations after temporary faults, the HVDC grid can resume normal operation. However, it is vital to discern between temporary faults and permanent faults before reclosing operation to prevent secondary shocks to the HVDC grid caused by blindly reclosing on permanent faults. For the problems of high cost and blind reclosing of HCBs, this article proposes a multiport HCB (MHCB) with high economy and adaptive reclosing capability. All ports of the MHCB share a single main breaker (MB) for fault isolation. The MHCB utilizes the capacitor voltage to lower the operating voltage of the metal oxide varistor (MOV), which reduces the number of IGBTs connected together at both ends of the MOV. With the above design, the expense of the MHCB is significantly decreased. Additionally, the MHCB achieves adaptive reclosing by using the difference of current amplitudes in the capacitor branch under permanent and temporary faults.

engineering, electrical & electronic