Abstract:The predicted leakage rate of piping circumferential through-wall cracks (CTWC) under various loading levels is a critical factor for the application of leak-before-break (LBB) technology. In current engineering approaches, the effect of welding residual stress has not been carefully taken into account. In this paper, both numerical analyses and comparative verification are adopted to examine the influence of typical welding residual stress field on the crack opening displacement for austenitic stainless steel piping with representative geometric dimensions and in situ measured material performance curves. An in-depth investigation is carried out to reveal the effect of the residual stress on morphological parameters of the CTWC flow channel. In the case where the residual internal stress of welding has the greatest effect, the Henry-Fauske model is employed to analyze the flow medium passing through the CTWC and the corresponding leak rate for a typical nuclear power plant. The results indicate that the welding residual stress leads to a substantial change in the crack opening displacement and crack morphology parameters. Both the current GE/EPRI method and the NUREG/CR-6837 modification recommended by the American Electric Power Research Institute underestimate the effect of this phenomenon, resulting in a higher prediction of the medium leakage rate. A similar situation is most likely to occur for the cases of short cracks in thin-walled piping and long cracks in thick-walled piping. Additionally, the obtained results reveal that the welding residual stress causes the whole crack surface to open negatively, and the axial line of the long crack on the thick-walled piping is close to a conic curve under specific conditions.

Development of Calculation Program for LBB Crack Opening Area and Leak Rate of Nuclear Pipes

Development of Calculation Program for LBB Crack Growth Stability of Pipe with Circumferential Through-wall Crack

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Prediction of Leakage from Through Pipeline Crack

A Prediction of the Leakage Through Cracks for Leak Before Break

LBB Leak Rate Calculation and Thermodynamic Non-equilibrium Effect Evaluation

Code Development and Characteristics Analysis for Leak Before Break in the Pipelines of Sodium-cooled Fast Reactor

Research on the Leak-Rate Characteristics of Leak-Before-Break (lbb) in Pressurized Water Reactor (Pwr)

Engineering assessment method for LBB stability analysis in pressure vessels and pipes

ICONE19-43138 Prediction of Failure Bending Moment for a Pipe Containing Multiple Circumferential Cracks with Complex Shapes

A code development for leak before break (LBB) leakage from supercritical to subcritical conditions

A Simplified Leak-Before-break Analysis Method of Pressured Pipes

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Crack growth stability analysis method for LBB assessment technology in pressure vessels and pipes

Experimental Investigation of Failure Estimation Method for Circumferentially Cracked Pipes Subjected to Combined Bending and Torsion Moments

Numerical Analysis of Limit Load and Reference Stress of Defective Pipelines under Multi-Loading Systems

Role of welding residual stress in stainless steel piping with application of the leak-before-break technology

Simplified leak-before-break analyzing method of pressure pipes

Calculation of Stress Intensity Factor for Annular Double Cracks on Inner Surface of Pipeline

Experimental Investigation on the Failure Estimation Method of Cracked Cylinders Subjected to Multi-Axial Loads

Study and Analysis of the Effect of Dynamic Load on the Application of Lbb Technology to the Primary Pipe of Reactor Coolant System