Abstract:<p>The pipeline safety management system is crucial to transfer oil and gas because the phenomena of leakage commonly occurs in the long-distant pipelines. Hidden safety hazards can be caused by design and construction defects, affected by natural disasters, or corroded by the transmission fluid. Therefore, quick detection will not only reduce the loss of transported oil and gas but also can protect the local environment. In this study, we develop a new method to detect the pipeline leak by analyzing pressure distribution through the leak. Pipeline leak detection tests are operated using a flow loop. Through the experiments, four parameters which are pressures and flow rates of pipeline inlet and outlet are recorded. Then the specific location of the leak is determined by dimensionless analysis of flow parameters. To generate the solution to locate the leak, we introduce three dimensionless variables, which are dimensionless leak location, dimensionless leak rate, and dimensionless pressure drop. Then the relationship of pressure distribution and leak parameters is built through the simulation models. After running 3D computational fluid dynamics (CFD) simulations with commercial software (FLUENT), the pressure distribution in the pipeline with leakage in the experiments will be verified by the experimental data. Finally, the mathematical models are developed to detect and evaluate the leakage through the pipeline. CFD simulation results show that both the leak rate and location have significant effects on the pressure distribution through the pipe, which is identical to the outcome from the experiments. When the dimensionless leak location is smaller or the dimensionless leak rate is larger, the dimensionless pressure drop is smaller. The mathematical model which is based on these dimensionless variables can be applied in locating the leak point in the real accident.</p>

Prediction of Leakage from Through Pipeline Crack

A Prediction of the Leakage Through Cracks for Leak Before Break

Two-dimensional Pipe Leakage Through a Line Crack in Water Distribution Systems

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

A code development for leak before break (LBB) leakage from supercritical to subcritical conditions

LBB Leak Rate Calculation and Thermodynamic Non-equilibrium Effect Evaluation

Code Development and Characteristics Analysis for Leak Before Break in the Pipelines of Sodium-cooled Fast Reactor

Research on the Leak-Rate Characteristics of Leak-Before-Break (lbb) in Pressurized Water Reactor (Pwr)

A comprehensive review of the leak flow through micro -cracks (in LBB) for nuclear system: Morphologies and thermal -hydraulic characteristics

A Comprehensive Review of the Leak Flow Through Micro-Cracks (in LBB) for Nuclear System: Morphologies and Thermal-Hydraulic Characteristics

Estimation of leak area-pressure relationship for cracks on water pipes using models based on linear-elastic fracture mechanics

Leak Rates of High Pressure Steam–water Across Simulation Crack

Development of Calculation Program for LBB Crack Opening Area and Leak Rate of Nuclear Pipes

Experimental Study on the Flow and Thermal Characteristics of Two-Phase Leakage Through Micro Crack

Numerical Investigation of the Leakage Flow from a Pressurized CO2 Pipeline

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Leak Simulation for Liquid Pipelines

Role of welding residual stress in stainless steel piping with application of the leak-before-break technology

Diagnosis of the single leakage in the fluid pipeline through experimental study and CFD simulation

A Simplified Leak-Before-break Analysis Method of Pressured Pipes

The Failure Window Method and Its Application in Pipeline Burst