Abstract:The assessment and control of the real losses from water distribution systems require the accurate estimation of the flow rate from an individual leak as a function of the internal pressure. The lack of analytical models able to accurately describe the relationship between the area of the leak and the pressure head is the key problem. This paper utilized the linear-elastic fracture mechanics (LEFM) theory for thin shells to derive models for both longitudinal and circumferential cracks. The models were validated by both finite element (FE) simulations and laboratory experiments under varying crack and pipe parameters. Both fluid-structure interaction (FSI) and traditional FE simulations were performed, and the results were compared to quantify the effect of leakage hydraulics on leak area. In the laboratory experiments, an image analysis technology was utilized to measure the leak area and flow rate simultaneously, so that the effect of the discharge coefficient could be excluded. In addition, the leak area was systematically measured under the effect of different parameters. The results revealed that the values predicted by the derived models were in good agreement with the experimental and FE simulation values for both types of cracks. The LEFM theory and the phenomena observed in this study can improve our understanding of the leak behavior and enable the development of effective pressure management strategies for water distribution systems.

LBB Leak Rate Calculation and Thermodynamic Non-equilibrium Effect Evaluation

Research on the Leak-Rate Characteristics of Leak-Before-Break (lbb) in Pressurized Water Reactor (Pwr)

Two-dimensional Pipe Leakage Through a Line Crack in Water Distribution Systems

A code development for leak before break (LBB) leakage from supercritical to subcritical conditions

A Prediction of the Leakage Through Cracks for Leak Before Break

Development of Leak Rate Model for Helium Flow in Elliptically Converging Through Wall Crack

Prediction of Leakage from Through Pipeline Crack

Leak Rate Calculation for Lbb Analysis in High Temperature Gas-Cooled Reactors

Code Development and Characteristics Analysis for Leak Before Break in the Pipelines of Sodium-cooled Fast Reactor

A Comprehensive Review of the Leak Flow Through Micro-Cracks (in LBB) for Nuclear System: Morphologies and Thermal-Hydraulic Characteristics

A comprehensive review of the leak flow through micro -cracks (in LBB) for nuclear system: Morphologies and thermal -hydraulic characteristics

Leak Rates of High Pressure Steam–water Across Simulation Crack

Impact of Main Pipe Flow Velocity on Leakage and Intrusion Flow: an Experimental Study

Experimental Study on the Flow and Thermal Characteristics of Two-Phase Leakage Through Micro Crack

Leak Model and Numerical Simulation of Pressure Vessel Based on Joule-Thomson Effect

A Simplified Leak-Before-break Analysis Method of Pressured Pipes

Estimation of leak area-pressure relationship for cracks on water pipes using models based on linear-elastic fracture mechanics

Development of Calculation Program for LBB Crack Opening Area and Leak Rate of Nuclear Pipes

Overview of Leak Rate Models for Leak Before Break Analysis

Simplified leak-before-break analyzing method of pressure pipes

Critical Mass Flux of Subcooled Liquid Leakage in a Nuclear Plant