Abstract:Leak-before-break analyses on tube microcracks are beneficial for preventing small loss of coolant accident in nuclear power plants. Specially, the tube leakage of steam generator may lead to steam generator tube rupture. Currently, experimental investigations on leak flow rate characteristics of normal temperature water and high pressure subcooled water through axial and circumferential microcracks of steam generator tubes were carried out, respectively. Cold Test results indicate that leak flow rates of circumferential microcracks for 0.13 <= W <= 0.16 mm and 3.6 <= delta/D-h <= 4.4 increase with a decreasing back pressure (P-out) first and then can be regarded as a constant value for a given working pressure in steam generator tubes (P-in). Additionally, each of Pin has a critical differential pressure between P-in and P-out (Lambda P-c). The ratio of Lambda P-c to P-in is equal to 0.55, which is smaller than 0.64 for axial microcracks. Hot Test results show that leak flow rates decrease significantly with an increasing working fluid temperature (T-f, in) when T-f, in is larger than a certain value due to the flashing of subcooled water near exits of microcracks. Besides, discharge coefficients of high pressure subcooled water through axial and circumferential microcracks under various back pressure conditions decreases with an increasing P-in for a given subcooled temperature. In general, new correlations were developed to give excellent predictions for the leak flow rate data of normal temperature water and high pressure subcooled water through axial and circumferential microcracks of steam generator tubes under various back pressure conditions with a maximum deviation of +/- 6%. (C) 2020 Elsevier Ltd. All rights reserved.

Research on the Leak-Rate Characteristics of Leak-Before-Break (lbb) in Pressurized Water Reactor (Pwr)

LBB Leak Rate Calculation and Thermodynamic Non-equilibrium Effect Evaluation

A code development for leak before break (LBB) leakage from supercritical to subcritical conditions

Two-dimensional Pipe Leakage Through a Line Crack in Water Distribution Systems

Code Development and Characteristics Analysis for Leak Before Break in the Pipelines of Sodium-cooled Fast Reactor

A Prediction of the Leakage Through Cracks for Leak Before Break

A Simplified Leak-Before-break Analysis Method of Pressured Pipes

Leak Rate Calculation for Lbb Analysis in High Temperature Gas-Cooled Reactors

A Comprehensive Review of the Leak Flow Through Micro-Cracks (in LBB) for Nuclear System: Morphologies and Thermal-Hydraulic Characteristics

A comprehensive review of the leak flow through micro -cracks (in LBB) for nuclear system: Morphologies and thermal -hydraulic characteristics

Prediction of Leakage from Through Pipeline Crack

Experimental Investigations on Leak Flow Rate Characteristics of Water Through Axial Artificial Microcracks of Steam Generator Tubes under Back Pressure Conditions

Simplified leak-before-break analyzing method of pressure pipes

Overview of Leak Rate Models for Leak Before Break Analysis

Study and Analysis of the Effect of Dynamic Load on the Application of Lbb Technology to the Primary Pipe of Reactor Coolant System

Leak Rates of High Pressure Steam–water Across Simulation Crack

Development of Calculation Program for LBB Crack Opening Area and Leak Rate of Nuclear Pipes

Role of welding residual stress in stainless steel piping with application of the leak-before-break technology

Experimental Study on the Flow and Thermal Characteristics of Two-Phase Leakage Through Micro Crack

Experimental Study on Leak Flow Rate Characteristics of High Pressure Subcooled Water Through Axial and Circumferential Microcracks of Steam Generator Tubes under High Back Pressure Conditions

Study on Leak Rate of Gas Medium in Leak-Before-Break Technique-Ii: Theoretical Studies