Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Experimental Investigation into the Flow Coefficient of a Quick-open Ball Thermal Expansion Valve

Numerical and experimental investigation of cavitation characteristics of the electronic expansion valves

Frictional Resistance Investigation of Sco2 and a Semi-Empirical Friction Factor Correlation Based on Wall-of-the-law

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Flow Dynamic Analysis Inside a Sleeve Regulating Valve with Different Valve Core Shapes

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF CAVITATING FLOW IN OIL HYDRAULIC BALL VALVE

Research on Fluid Dynamics and Thermal Characteristics in Hydraulic Valves by Thermal-Fluid-Solid Coupling Method

Characteristics of Heat Transfer for CO2 Flow Boiling in Mini_channel

An Investigation of the Temperature Distributions Inside A Spool Valve Owing to A Viscous Heating Effect

Study of Heat Transfer for Co2 Flow Boiling in Horizontal Small Diameter Tubes

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

NUMERICAL AND EXPERIMENTAL INVESTIGATION OF CAVITATING FLOW IN OIL

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Refrigerant Flow Through Electronic Expansion Valve: Experiment and Neural Network Modeling

Experiment and numerical simulation of cavitation performance on a pressure-regulating valve with different openings

Numerical Study of the Microflow Characteristics in a V-ball Valve

Influencing factors on flow boiling of carbon dioxide in enhanced tubes and comparison with correlations

A New Heat Transfer Model for Flow Boiling of Refrigerants in Micro-Fin Tubes

Numerical Analysis about the Dynamic Properties of a Pressure Relief Valve and Improvement Measures

Experimental Investigation of an Automatic Flux Compensation Valve

Experimental investigation on flow boiling heat transfer of R290, R600a and their mixtures in a horizontal minichannel