Abstract:This paper presents a new theory for the lateral buckling of web-tapered I-beams. Linear analysis is first conducted by taking account into the tapering effects of web-tapered I-beams, where the deformation compatibilities of the two flanges and web are considered in terms of the basic assumptions of thin-walled members. Subsequently, the total potential for the lateral buckling analysis of web-tapered I-beams is developed, based on the classical variational principle for buckling analysis. The lateral buckling loads of web-tapered cantilevers and simply supported beams of I-sections from the proposed theory are compared with those from the finite element (FE) analyses using two shell element models and two widely used beam element models. The two beam element models respectively represent the equivalent method using prismatic beam elements and the typical tapered beam theory in existing literature. These comparisons show that the results based on the total potential proposed in this paper are more accurate in predicting the lateral buckling loads of web-tapered I-beams than those in existing theories, indicating that the theory proposed in this paper is superior to existing theories. It is also found that the equivalent method using prismatic beam elements may yield unreliable buckling loads of tapered beams.

The Warping Torsional Deformation Analysis of Spot-Welded Double-Hat Box-Section Thin-Walled Beam under the Change of Spot-Welds Pitch

RESEARCH ON WARPING TORSION OF SPOT-WELDED THIN-WALLED BOX SECTION BEAM

ANALYSIS OF LOCAL WARPING AND TORSIONAL RIGIDITY OF SPOT-WELDED THIN-WALLED BOX SECTION BEAM WITH DIFFERENT WALL THICKNESS

STUDY ON WARPING TORSION OF SPOT-WELDED THIN-WALLED BOX SECTION BEAM WITH CONCENTRATED LOAD OR UNIFORMLY DISTRIUTED LOAD

Torsion in Spot-Welded Thin-Walled Box with Varying Section

Elastic Finite Element Analyses and Experiment Research on Welded Spherical Joints with Square Hollow Sections

Research on Warping and Torsion of Spot-welded Thin-walled Beams with Elastic Constraints from Both Ends

WARPING TRANSFER THROUGH JOINTS OF RHS COLUMN AND I-BEAM

TORSIONAL DEFORMATION CALCULATION OF LARGE SPAN THIN-WALLED STEEL BOX GIRDER WITH OPEN SECTION

FREE AND WARPING TORSION RIGIDITIES OF HOT-ROLLED SECTIONS WITH TAPERED FLANGE THICKNESS

Warping and Bimoment Transmission Through Diagonally Stiffened Beam-to-column Joints

Lateral Buckling of Web-Tapered I-beams: A New Theory

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Torsional warping analysis of arbitrary beam cross-sections by weak form quadrature elements

Experimental study on centrifuge concrete filled thin-walled steel tubular components under the action of torsion

An Approach to Multi-parameter Warping Displacement Function for Static Analysis of Curved Trapezoidal Thin-walled Box Girders

Static Analysis for Weld-Bonded Single-Lap Shear Joint with Multiple Weldspots

Analysis of Geometrically Exact Beams with Torsion-Warping Deformation by Weak Form Quadrature Elements

Analysis of Wrinkling Behavior of Hydroformed Torsion Beam

Experimental and computational analysis of residual buckling distortion of bead-on-plate welded joint