Abstract:Local buckling behaviour of welded high strength steel (HSS) I-sections subjected to bending is crucial for structural designs, and has been found to be affected by the interactive effect between flanges and web. To realize accurate designs considering the local buckling behaviour, the continuous strength method (CSM), direct strength method (DSM) and the method from Kato, all of which incorporate the element interaction, have been developed for hot-rolled or cold-formed structures fabricated with conventional strength steel, aluminium or stainless steel. This paper aims to extend these methods for the design of welded HSS I-sections subject to bending. The results of 593 HSS material tensile tests and 40 tests on HSS I-beams are collated. 526 numerical models are generated to expand the data pool for this study using the validated finite element method. Underpinned by the collection of test data and numerical data generated from an extensive parametric study, the design expressions based on the CSM, DSM and the method from Kato, applicable to HSS I-sections under bending, are proposed. The statistical and reliability analysis indicate that the proposed CSM, DSM and Kato’s method provide more satisfactory strength predictions than the codified design rules in Eurocode 3 and AISC specification. In comparison with the proposed CSM and DSM, the predictions based on the modified Kato’s method show higher accuracy, which may be attributed to the separate consideration for the effect of flange and web slenderness in Kato’s expression.

FREE AND WARPING TORSION RIGIDITIES OF HOT-ROLLED SECTIONS WITH TAPERED FLANGE THICKNESS

WARPING TRANSFER THROUGH JOINTS OF RHS COLUMN AND I-BEAM

LOCAL AND DISTORTIONAL BUCKLING OF COLD-FORMED C AND Z-SECTION MEMBERS UNDER BENDING

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Static model and cross section characteristic analysis of steel strand

ANALYSIS OF TWISTING ABOUT UPPER FLANGE OF C-SECTION PURLIN WITH TWO SAG RODS

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

FLEXURAL BEHAVIOUR OF THIN-WALLED DODECAGONAL SECTION DOUBLE SKIN CONCRETE-FILLED STEEL TUBES

Seismic Behavior of Steel Tube Confined RC Columns under Compression-Bending-torsion Combined Load

CROSS SECTIONAL SHEAR STRAIN DISTRIBUTION OF RECTANGULAR CONCRETE FILLED STEEL TUBE COLUMNS SUBJECTED TO TORSION

Fine analysis of section stress of steel strand

ANALYSIS OF LOCAL WARPING AND TORSIONAL RIGIDITY OF SPOT-WELDED THIN-WALLED BOX SECTION BEAM WITH DIFFERENT WALL THICKNESS

Design for local buckling behaviour of welded high strength steel I-sections under bending

The Warping Torsional Deformation Analysis of Spot-Welded Double-Hat Box-Section Thin-Walled Beam under the Change of Spot-Welds Pitch

Experimental investigation on axial compression behaviour of cold-formed thick-walled steel tubes

Finite Element Analysis on Bearing Behavior of I-section Beam with Longitudinally Variable Thickness Flanges

Experimental study on deformation performance of I?section beam with longitudinally variable thickness flanges

Analysis of Reinforced Concrete Slabs Subjected to Pure Torsion

Experimental study on Tapered Concrete-Filled Double Skin Steel Tubular columns under torsion

Experimental Study of Inner-and-Outer Steel Flanges Subjected to Tension and Bending Loads