Revealing the microstructures and seepage characteristics in the uncured rubber-cord composites using micro-computed tomography and lattice Boltzmann approach
Yong Li,Fangkai Guo,Yanmeng Chi,Peng Xiao,Shanling Han,Yanan Miao,Linjiang Ma
DOI: https://doi.org/10.1016/j.polymertesting.2023.108169
IF: 5.1
2023-08-14
Polymer Testing
Abstract:The internal microstructure distribution of cord-rubber-air during the processing of uncured rubber-cord composites (URCs) determines the finished product's performance. For the first time, we used computed tomography (CT) and the lattice Boltzmann method (LBM) to establish a geometrical representation model of the real microscopic pore-fracture structures of URCs and investigate the seepage law of fluid in porous URCs, where the reinforced rubber formula was originally designed to reduce CT artifacts of cord. The results showed that the average porosity and pore radius of the original cord (0.2711 and 15.53 μm, respectively) were considerably larger than those of the URCs (0.0509 and 4.46 μm, respectively); the pore number of the cord was the largest when the pore radius was 5–10 μm, accounting for 29.36% of the total number; however, the pore number accounted for 31.36% of the total number of the URCs when the pore radius was 2–3 μm. Moreover, the characteristics of the pore/throat surface area and pore volume/throat length exhibited perfect consistent patterns with those of the pore radius. Furthermore, the fluid flow velocity increased in both cord and URCs as the displacement differential pressure increased, but decreased dramatically as the fluid kinematic viscosity increased. The critical values of displacement differential pressure and kinematic viscosity were different in the cord and URCs samples, presenting 11.1209 Pa/1.3696×10 −3 m 2 /s and 14.2984 Pa/2.8869×10 −4 m 2 /s, respectively. This phenomenon should be attributed that when the uncured rubber was injected into the original cord sample, its porosity decreased, its pore radius decreased, the number of micro-scale pores increased, and flow resistance became larger, resulting in a higher critical value of displacement differential pressure and a lower critical value of kinematic viscosity.
materials science, characterization & testing,polymer science