Abstract:Few efforts have been put on the theoretical studies on floating hoses at sea in China, resulting in little theoretical basis for the design, manufacturing and maintenance of hose. To address the problem, the bending and dynamic behavior of floating hose are analyzed in depth. A finite element model of the floating hose was first established. When performing the bending behavior analysis, the position change of the point on the hose is recorded by applying an appropriate bending moment. The deflection of each section of the hose is then obtained, thereby attaining the bending rigidity and the equivalent elastic modulus of the hose. In the dynamic analysis of the hose, the hose is simplified to a beam to obtain the equivalent material parameters by an equivalent method. The Morison equation is then modified based on the floating state of the hose working condition to derive the wave load on the hose. Through the transient analysis, the loads of each part of the hose versus time are obtained. The analysis shows that, with the wave loads of multiple cycles are superimposed on each other, the deformation in the middle of the floating hose and the bending moment at the two ends have a complicated shape with time. Therefore, enhancement processing should be done at the two ends of the hose. The material at the intermediate position should have a relatively high tensile and bending capacity. The study results have an important reference for the design and manufacturing of floating hose.

Modeling of the Non-Braided Fabric Composite Rubber Hose for Industrial Hose Pump Design

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Prediction and design optimization of mechanical properties for rubber fertilizer hose reinforced with helically wrapped nylon

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Modeling of Pneumatic Dual Reciprocating Bellows Pump with Flexible Linkage

Study on Modeling and Simulation of Concrete Pump Hydraulic System

Investigation of Pressure Variations in Hose Pumps under Different Flow Regimes Using Bidirectional Fluid–Structure Interaction

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Theoretical Analysis of Reinforcement Layers in Bonded Flexible Marine Hose under Internal Pressure

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

Numerical Simulation and Optimization of Internal Flow Field in the High Pressure Coal Conveying Pump Based on the Dynamic Mesh

Finite Element Modelling on the Mechanical Behaviour of Marine Bonded Composite Hose (MBCH) under Burst and Collapse

Finite Element Analysis on Piston of Axial Piston Pump Based on Virtual Prototype

An Equivalent Linear Method to Predict Nonlinear Bending Mechanics of Dredging Floating Hose String

Analysis of Bending and Dynamic Behavior of Floating Hose

Modeling and Simulation on Axial Piston Pump Based on Virtual Prototype Technology

Numerical and Experimental Study on Balanced Performance and Axial Stiffness of Fiber-Reinforced Rubber Pipe

Dynamic modelling and natural characteristics analysis of fluid conveying pipeline with connecting hose

RESEARCH OF MECHANICAL PERFORMANCE OF KNITTING CORD REINFORCED RUBBER HOSE

Construction of 3-Dimensional Model and Prediction of Effective Mechanical Properties of the Reinforced Fibrous Braid Layer of Brake Hose

Radial Pressure Load Simulation of Floating Oil Hoses