Abstract:To explore the internal flow mechanism and improve the performance of a supersonic compressor, an efficient global optimization design method was developed for an axial flow compressor and applied in the optimization design of a prototype supersonic compressor. Based on the multiple circular arc (MCA) blade parameters, the method can be used to parameterize the elementary stage of the blade. The optimized solution is obtained by changing the elementary stage and stacking lines of the blade during the optimization process. It has the advantages of fewer optimization variables, strong physical intuition, and a smooth surface. The optimization results show that a change in the rotor blade shape parameters has a significant effect on the compressor efficiency under design conditions, while a change in the skewed-swept parameters of the stator is the main factor that improves the compressor's performance under near-stall conditions. Further numerical results show that the optimized rotor changes the form of the shock, weakens the degree of shock boundary layer interference, inhibits the radial migration flow of the supersonic rotor, reduces the loss of the rotor blade top, and improves the performance of the compressor under design conditions. The stator's optimization restrains the generation of a concentrated shedding vortex at the root of the blades and greatly improves the stall margin of the compressor. Finally, the total pressure ratio and flow rate are less than 1% of the values based on the prototype operating conditions, the design mass flow of the optimized high-load supersonic compressor is increased by 0.25%, the isentropic efficiency is increased by 1.05%, and the stall margin is enhanced by 3.5%, thus verifying the effectiveness of the optimization method.

Optimal Structural Design of Swing Double- vane Rotary Compressor

Structural Optimal Design of a Swing Vane Compressor

THE ESTABLISHMENT OF THE MATHEMATICAL MODEL 2 . 1 The Geometric

Mathematical Simulation and Design Optimization of a Novel Swing Vane Compressor

Simulation on Structural Strength of the Double Vane Translational Rotary Compressor Based on ANSYS

Geometric Theory for a Translational Rotary Compressor

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Design and Dynamic Analysis of a Novel Double-Swing Vane Compressor for Electric Vehicle Air Conditioning Systems

Modeling and Performance Analysis of Rotary Compressor Considering Multi-Body Coupling and Bearing Deformation

Dynamic Analysis and Calculation on Synchronal Rotary Compressor

Operational optimisation of a novel dual-piston linear compressor: Simulation and experiment

Design Improvements of Vane Bearing Compressor

Research on 3D Design of High-Load Counter-Rotating Compressor Based on Aerodynamic Optimization and CFD Coupling Method

Design improvement for suction shape in rotary compressor

Geometric model and pressurization analysis on a novel sliding vane compressor with an asymmetrical cylinder profile

A Novel Vapor Injection Structure on the Blade of A Rotary Compressor

A Theoretical Study on the Novel Structure of Vane Compressor for High Efficiency

NUMERICAL OPTIMIZATION OF BOWED COMPRESSOR CASCADE WITH LARGE TURNNING ANGLES AND DIFFERENT SOLIDITIES

Performance Research and Improvement of Ultra-High-speed R290 Rotary Compressor