Abstract:To explore the internal flow mechanism and improve the performance of a supersonic compressor, an efficient global optimization design method was developed for an axial flow compressor and applied in the optimization design of a prototype supersonic compressor. Based on the multiple circular arc (MCA) blade parameters, the method can be used to parameterize the elementary stage of the blade. The optimized solution is obtained by changing the elementary stage and stacking lines of the blade during the optimization process. It has the advantages of fewer optimization variables, strong physical intuition, and a smooth surface. The optimization results show that a change in the rotor blade shape parameters has a significant effect on the compressor efficiency under design conditions, while a change in the skewed-swept parameters of the stator is the main factor that improves the compressor's performance under near-stall conditions. Further numerical results show that the optimized rotor changes the form of the shock, weakens the degree of shock boundary layer interference, inhibits the radial migration flow of the supersonic rotor, reduces the loss of the rotor blade top, and improves the performance of the compressor under design conditions. The stator's optimization restrains the generation of a concentrated shedding vortex at the root of the blades and greatly improves the stall margin of the compressor. Finally, the total pressure ratio and flow rate are less than 1% of the values based on the prototype operating conditions, the design mass flow of the optimized high-load supersonic compressor is increased by 0.25%, the isentropic efficiency is increased by 1.05%, and the stall margin is enhanced by 3.5%, thus verifying the effectiveness of the optimization method.

NUMERICAL OPTIMIZATION OF BOWED COMPRESSOR CASCADE WITH LARGE TURNNING ANGLES AND DIFFERENT SOLIDITIES

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Assessment of Turbulence Adjoint Method in Sensitivity Calculation and Aerodynamic Design Optimization of Turbomachinery Cascades

A throughflow-based optimization method for multi-stage axial compressor

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Aerodynamic Design Optimization Of The Last Stage Of A Multi-Stage Compressor By Using An Adjoint Method

A Gradient-Based Method Assisted by Surrogate Model for Robust Optimization of Turbomachinery Blades

Design Optimization of a Blended Blade and Endwall in a Compressor Cascade

Advanced Aerodynamic Optimization System for Turbomachinery

Three-Dimensional Aerodynamic Optimization of a Multi-Stage Axial Compressor

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

AERODYNAMICS OPTIMUM DESIGN OF COMPRESSOR BLADES BASED ON NUMERICAL OVERALL PERFORMANCE CALCULATION

A Combinatorial Optimization Design Method Applied to S-shaped Compressor Transition Duct Design

Blade Design with Three-Dimensional Viscous Analysis and Hybrid Optimization Approach

Genetic optimization design for aerodynamic structure of oblique flow compressor radial inlet chamber in compressed air energy storage system

Study on Adjoint-Based Optimization Method for Multi-Stage Turbomachinery

AERODYNAMICS OPTIMUM DESIGN OF BLADES IN CENTRIFUGAL COMPRESSOR

Aerodynamic Optimization Design for All Condition of Centrifugal Compressor

Shape Optimization of Multi-Stage Axial Compressor Blades Using Adjoint Method with Static Pressure Constraint at Blade Row Interface

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model