Abstract:To explore the internal flow mechanism and improve the performance of a supersonic compressor, an efficient global optimization design method was developed for an axial flow compressor and applied in the optimization design of a prototype supersonic compressor. Based on the multiple circular arc (MCA) blade parameters, the method can be used to parameterize the elementary stage of the blade. The optimized solution is obtained by changing the elementary stage and stacking lines of the blade during the optimization process. It has the advantages of fewer optimization variables, strong physical intuition, and a smooth surface. The optimization results show that a change in the rotor blade shape parameters has a significant effect on the compressor efficiency under design conditions, while a change in the skewed-swept parameters of the stator is the main factor that improves the compressor's performance under near-stall conditions. Further numerical results show that the optimized rotor changes the form of the shock, weakens the degree of shock boundary layer interference, inhibits the radial migration flow of the supersonic rotor, reduces the loss of the rotor blade top, and improves the performance of the compressor under design conditions. The stator's optimization restrains the generation of a concentrated shedding vortex at the root of the blades and greatly improves the stall margin of the compressor. Finally, the total pressure ratio and flow rate are less than 1% of the values based on the prototype operating conditions, the design mass flow of the optimized high-load supersonic compressor is increased by 0.25%, the isentropic efficiency is increased by 1.05%, and the stall margin is enhanced by 3.5%, thus verifying the effectiveness of the optimization method.

AERODYNAMICS OPTIMUM DESIGN OF COMPRESSOR BLADES BASED ON NUMERICAL OVERALL PERFORMANCE CALCULATION

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

AERODYNAMICS OPTIMUM DESIGN OF BLADES IN CENTRIFUGAL COMPRESSOR

An Optimization on the Stacking Line of Low-Pressure Axial-Flow Fan Using the Surrogate-Assistant Optimization Method

Performance Improvement of Optimization Solutions by POD-based Data Mining

Optimized Aerodynamic Design of Multi-blade Rows of an Axial Compressor

Optimized Design of Axial Compressor Blades

Aerodynamic Optimization Design for All Condition of Centrifugal Compressor

Optimization Design of Aspect Ratio and Solidity of a Heavy-Duty Gas Turbine Transonic Compressor Rotor

Aerodynamic 3-Dimensional Optimal Design by NURBS of a Certain Stage Turbine Blades

Full 3-D Viscous Aerodynamic Optimization Design System for Turbomachinery

Aerodynamic Optimization of a Fan/Booster Stage Blade in an Overall Engine Environment

Design Optimization of the Last Stage of a 4.5-Stage Compressor Using a POD-based Hybrid Model

Optimal Design and Analysis of a High-Load Supersonic Compressor Based on a Surrogate Model

Advanced Aerodynamic Optimization System for Turbomachinery

A Novel Surface Parametric Method and Its Application to Aerodynamic Design Optimization of Axial Compressors

Multi-objective Optimization Design of Axial Compressor Blade and Stability Margin Analysis

Blade Geometry Optimization For Axial Flow Compressor

Optimization Design on Ground Based Heavy Duty Gas Turbine Compressor Blades

A Study of an Aerodynamic Design System for the Layered Optimization of a Compressor

A Method for the Optimized Design of Centrifugal Compressor Blades