Abstract:A mathematic model focusing on expander thermodynamics and vane dynamics was developed to investigate the major factors influencing the efficiencies of the rotary vane expander. Several factors were taken into account, including the leakage through various leakage paths, friction associated with the vanes, and flow through the inlet/outlet ports. The model was validated by comparing the calculated thermodynamic processes and vane movement with the experimental data, which showed the deviation was less than 10%. The predicted results from the model indicated that the expander would have an optimum pressure ratio of about 2.2. Although the volumetric efficiency increased with the rotational speed, the optimal rotational speed of 2300 rpm was obtained at inlet and outlet pressures 8 MPa (1160 psi) and 4 MPa (580 psi) and an inlet temperature of 40°C. The leakage through both the end gaps and the sealing arc had a significant influence on the expander efficiency, accounting for 35% and 28%, respectively, of the losses in the volumetric efficiency. Among the major geometric parameters of the expander, larger eccentricity and vane incline angle had a positive effect on the expander efficiencies, and the increase in the vane width had a negative effect, while the effect of the ratio of length to radius seemed to be insignificant.

THE ESTABLISHMENT OF THE MATHEMATICAL MODEL 2 . 1 The Geometric

Optimal Structural Design of Swing Double- vane Rotary Compressor

A Mathematical Model Of Movable Component In Single Screw Compressor

Mathematical Simulation and Design Optimization of a Novel Swing Vane Compressor

Structural Optimal Design of a Swing Vane Compressor

Geometric Theory for a Translational Rotary Compressor

Modeling of a Two-Stage Rotary Compressor

Geometric model and pressurization analysis on a novel sliding vane compressor with an asymmetrical cylinder profile

Dynamic Characteristic of Rotary Vane Compressor

A Mathematical Model of Variable Displacement Wobble Plate Compressor for Automotive Air Conditioning System

Geometric Model of Scroll Compressor Based on Symmetric Arc Shaped Curves with Equal Beta Angle

Essential Geometric Theory of Internal-meshing Rotary Compressor

Operational optimisation of a novel dual-piston linear compressor: Simulation and experiment

Application of the geometry of conjugate curves to the design of internal-meshing rotary compressors

Study of a Rotary Vane Expander for the Transcritical CO 2 Cycle—Part II: Theoretical Modeling

Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor

Geometric Relationship of New Type of Internal Meshing Rotary Compressor

Study on Geometric Model of Scroll Compressor

Modeling and Simulation Approach for Compressor System Based on Compressor Stage

Mathematical Modeling of Scroll Refrigeration Compressors

Thermodynamic analysis of the rotary tooth compressor