Abstract:<p>With increasing social concern towards industrial wastewater treatment, desulfurization wastewater evaporation technology is attracting attention in theoretical investigation and showing competitive capability in practical applications by virtue of its low cost and high efficiency. In engineering practice, the selection of nozzle model, evaporation chamber size and flue gas source need to be carefully determined, ideally with comprehensive understanding of the process mechanism. Important factors to be considered include wastewater evaporation characteristics such as evaporation time, distance, and so on, which are difficult to be obtained directly through physical experiments. Numerical simulation can be utilized conveniently for the extraction of such data and further post analysis. In this study, a salt containing droplet evaporation model is combined with a two-way interphase coupling method to investigate the spray evaporation process. Numerical results show that by increasing the injection velocity and the liquid film thickness, and reducing the flue gas velocity, droplets were observed to be more dispersed in the flue, which in turn enhance the evaporability. The velocity difference between the gas-liquid phases is correlated with the gas-phase turbulent kinetic energy. Non-uniform inlet velocity can increase the flow turbulence intensity. This leads to enhanced droplet evaporation performance on one hand, but increased probability of the droplets hitting the wall on the other hand. From this study, we have also observed that the droplet evaporativity increases with the temperature. Finally, an optimal set of parameters are selected from the simulation exercises to achieve an optimal evaporation outcome. These parameters are introduced in large engineering design to guide the selection of the nozzle model and determine the evaporation chamber size.</p>

Numberical Simulation Study of Flue Gas Desulphurization by Spray Drying

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Modeling on circulating fluidized bed flue gas desulfurization

Simulation Study on Centrifugal Spray Evaporation Characteristics and Process Optimization of Desulfurization Wastewater

Process simulation on atomization and evaporation of desulfurization wastewater and its application

Simulation of Droplet-gas Flow in the Effervescent Atomization Spray with an Impinging Plate

Integrated Modeling of Semi-dry Flue Gas Desulfurization

NUMERICAL SIMULATION OF FLUE GAS DESULPHURIZATION PROCESS IN A CIRCULATING FLUIDIZED BED

Numerical simulation of the simultaneous removal of particulate matter in a wet flue gas desulfurization system

Semi-dry flue gas desulphurization in spray towers: a critical review of applicable models for computational fluid dynamics analysis

Study on Spray Condensation Performance of Desulfurization Wet Flue Gas

Particle trajectory model desulfurization spray tower used in numerical simulation of flue gas]

Three-Dimensional Simulation Of Effervescent Atomization Spray

Numerical Simulation of Fluidized Bed Coating Process Considering Particle Abrasion

Study on Parameter Optimization of Desulfurized Wet Flue Gas in Spray Condensation Process

CFD-DEM simulations of a gas-solid-liquid fluidization system: Effects on the flow field and particle behavior of semi-dry desulfurization fluidized bed

Study on Spray Evaporation Treatment of Desulfurization Wastewater

Characteristics analysis and parameters optimization of desulfurization wastewater evaporation in a rotary spray drying tower

Mass transfer process intensification for SO2 absorption in a commercial-scale wet flue gas desulfurization scrubber

Numerical Investigation on the Evaporation Performance of Desulfurization Wastewater in a Spray Drying Tower without Deflectors

Performance Optimization of Wet Flue Gas Desulphurization System Based on CFD Technology